55” 1080p/120Hz LCD Television LC55VFZ61 11
Contents Contents Caution Safety Information 1 2 Unit and Accessories Product Feature 3 3 Product Introduction Connections 4 5 Remote Control 6-7 Basic Operation 8 OSD Menu 1. Video menu 2. Audio menu 3. TV menu 4. Setup menu 5.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor. • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessories & Product Feature Unit and Accessories TV set INPUT 1 2 3 4 5 6 7 8 9 0 -/-- PICTURE SOUND SLEEP DISPLAY CH+ VOL+ MUTE CH- VOL- MENU EXIT OK CC User’s Manual MTS EPG FAV Remote control AC Power Cable Product Feature • Integrated ATSC TV tuner for HDTV broadcast reception • Three HDMI input for true digital connections • VGA port for connection to PC 3
Product Introduction Product Introduction Front View Power Indicator Remote Control window (Keep clear) 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press Power Button to turn on and off. Indicator on(Red) Indicator on(Green) Standby mode Power on mode The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control window. 2).
Connections Connections Service HDMI1 1 HDMI2 2 HDMI3 Headphone out Coax Y Pb Pr L IN R IN Video L IN R IN 2 VGA S-Video Y Pb Pr L IN R IN Video L IN R IN 1 PC IN 3 4 5 6 7 1). 2). 3). 4). 5). 6). 8 9 RF AC POWER IN 10 11 SWITCH 12 Service: USB port for service. HDMI1/2/3: Connect them to the video output terminal of the external device. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.
Remote Control Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER(red button): Turn the TV on/standby. INPUT: Press to display the input source menu. INPUT 1 2 3 4 5 6 7 8 9 0 -/-- PICTURE SOUND SLEEP DISPLAY CH+ VOL+ MUTE CH- VOL- MENU EXIT OK CC Number Buttons: Choose channel directly.
Remote Control Remote Control Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 30 feet(7m) and 300 to the left and right of the IR receive at the front of the LCD TV. - Used batteries should be disposed properly.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with the power code. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display input source menu, and use CH+/- button on the TV set or Ĥ0ĥ!button on remote control to select the input source, press OK button on the remote control to enter.
OSD Menu OSD Menu 1. Video menu Description Note: The item Color, Sharpness and DNR will not display in VGA mode; The item Tint will display only in NTSC mode; The item VGA will display only in VGA mode. Picture Mode: Select your desired picture mode. You may select the picture mode directly by pressing the PICTURE button on the remote control. Brightness: Adjust image black level. Contrast: Adjust image contrast. Color: Adjust image color.(Invalid in VGA mode) Sharpness: Adjust the sharpness.
OSD Menu OSD Menu Auto adjust: Setup the parameter of the screen automatically. H/V Position: Adjust the transverse/vertical position of the screen. Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained. Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen. DNR: If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Mid and High.
OSD Menu OSD Menu 3. TV menu (in TV mode) Description ĥ Tuner Mode: Select Cable or Air as the tune mode. Channel Scan: Press to start channel auto scan, This process will find all available Analog and Digital channels and store them. Note: When the TV is auto tunning, you could press MENU button to stop auto tunning and return to preview menu.
OSD Menu OSD Menu 4. Setup menu Description OSD Language: Select OSD language. OSD Transparency: Change the OSD transparency. Time Setup Time zone: Select the time zone. Time: Setup time for the TV in the Time menu. Sleep Timer: Setup the sleep timer(Auto shut down the TV). Time Display Mode: Change the time display mode. Caption Analog Closed Caption: Setup the Closed Caption for analog channels. Digital Closed Caption: Setup the Closed Caption for digital channels.
OSD Menu OSD Menu 5. Parental menu Description Note: you shoud enter the passward (default passward:0000) to enter the the Parental menu Program Block Rating Enable: Turn on/off the Progam Block function. ĥ Ĥ U.S. TV Ratings: Use Ĥ / ĥ / / button to select, and press OK button to sign (blocked). U.S. Movie Ratings: Use Ĥ / ĥ button to select, and press OK button to sign (blocked).
OSD Menu OSD Menu Canadian English Ratings: Use Ĥ / ĥ button to select, and press OK button to sign (blocked). Canadian French Ratings: Use Ĥ / ĥ button to select, and press OK button to sign (blocked). Open V-Chip: Use Ĥ / ĥ button to select, and press OK button to set the open V-Chip setinggs Change Password: Change the password in the submenu for parental control. Clear All: Press OK button to clear all settings.
OSD Menu OSD Menu 15
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
Technical Specifications Technical Specifications 55 500cd/m 2 Dynamic Contrast Ratio 10000:1 ȍ 8W x 2 1920x1080 2 S-VIDEO 1 2 4 3 HEADPHONE 1 ̚ 350W * Product specifications and appearance are subject to change without notice.
INSTRUCTION FOR WALL MOUNT INSTRUCTION FOR WALL MOUNT The wall mount kit (not included) with your purchase allows you to mount your VIORE TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. VIORE is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.
20
VIORE, Inc.