26" HD LCD Television with Built-in DVD Ployer LCD26VH59 AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode. Please refer to page 17 of the owner's manual for the details of this menu.
• Caution .......................................................................................... 1 • Safety Information ................................................................................ 2 • Names of each part(Front View) / Accessories 3 ...................................................... • Names of each part(Back View) .................................................................... 4 • Mounting on a Desktop / Installation Precautions. ....................................
The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute risk of electric shock to the persons. The exclamation point within an equilateral triangle the presence of important operating and maintenance the literature accompanying the appliance.
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected the label. to a mains supply which matches that stated on • To prevent overload, don't share the same mains supply socket with too many other items of equipment. • Do not place any connecting wires where: they may be stepped on or tripped over.
_O 6o _0 --0 _0 _0 _o _o _o --O m _o i0 i0 L___.J O O INPUT button - Input Source MENU button - OSD CH+/- button- Menu Select Display Channel/Program VOL+/- button - Volume PLAY- Play/Pause DVD Button EJECTPOWER Button %- Button +,- Button LED O DVD eject, button Indicator Remote Control Window program ® The configuration of the components may look different from the following illustration.
E] SWITCH AC , 1. AC POWER POWER IN ,A 40° IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable. 2. SWITCH: Switch on or off the power suply. 3. HDMII/2/3: Connect them to the video output terminal of DVD.(used in HDTVl mode) 4. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC. 5. PC AUDIO IN: Connect it to the audio output terminal of PC. 6.YPbPr 1: Connect them to the video output terminal of DVD.(used in HDTVl mode).
÷ Your LCD TV can be mounted on a Desktop as shown in the figure above. ÷ This is not floor-standing unit. ÷ Please secure enough space for safe use. (Please refer to A and B.) ÷ Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV due to increased temperature. A ii/_¸, (Mounting on a wall) ÷ Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation.
÷ For connecting to ATSC or NTSC broadcasts O ] Wall Jack with F-Connector Coaxial (Round) Antenna Cable external Antenna Analog+Digital 75 Press TV/AV button on the remote control to select TV, then press OK button to confirm. Then you can receive the ATSC/NTSC signal.
÷ Functions of remote control buttons The remote control is using Infra-Red (In). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER Press to turn the TV on/standby PICTURE Press repeatedly to cycle through the available video picture modes. SOUND Press to cycle through the different sound settings. SLEEP Press to setup the sleep time DISPLAY Press to enter the EPG menu directly.
LANGUAGE Select DVD disc language. ZOOM Adjust picture size in DVD mode. SUBTITLE Select DVD disc subtitle. SLOW/STEP Play DVD programs at slow speed. MENU DVDeject. i,/11 Play/Pause DVDprogram. StopDVDprogram. SETUP DVD system setup. (4 DVD fast reverse. DVD fast forward. H4 DVD previous chapter. )I,I DVD next chapter. DVD play list/Disc menu ANGLE Select DVD picture angle. TITLE DVD title. GOTO Play your favorite title/chapter/track. PROGRAM Select DVD picture angle.
1. Check the polarity (+,-) of the batteries in the remote control. 2. Check that the batteries have power. 3. Check that the LCD TV is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV. 1. Open the cover completely. 2. Insert the two supplied batteries. Ensure that the polarities (+ and -) of the batteries are aligned correctly. 3. Silde back the cover. m Step 1 Step 2 whoosert.................. .........
÷ Power on/off m Press on the buttom of the LCD TV to _ first. • To turn the LCD TV on : Press "POWER" button on the LCD TV. • To turn the LCD TV off : Press "POWER" button on the LCD TV. • To turn on/off by remote control : Press the button of remote control. * You can select between the TV signal and the input signal of other equipments connected to the TV. - Use this function to switch to the input source you wish to view. INPUT Press button on the remote control.
Basic OSD Menu operation Press MENU button to display the OSD menu as below: i Use ( / > button to select the main menu, and press V button to enter the submenu. In the submenu, use A / V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with ( / > button; select ("Picture Mode" item in Picture menu for example) with ( / > button; enter the submenu ("Close Caption" item in Setup menu for example) with > button.
OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Set the amount of fine detail in the picture. Color Temp.
2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. SPDIFType: Allows you to select between Audio Language: Select audio language. PCM and RAW.
3. Time menu Sleep timer: You may set the automatic deactivate this function. shutdown timer choosing from 5 to 240 minutes, Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: Modify date and time.
4. Setup menu Menu Language: Select Transparency: Turn on Zoom Mode: Select the 4:3, 4:3 zoom. Noise reduction: Select OSD menu language. or off the transparency menu function. zoom mode between 16:9, 16:9 zoom, the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Frequency, Phase or even perform an Auto adjustment.
5. Lock menu You must enter the password to gain access to the Lock menu. The default password is 0000. You may modify the following options: Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don't work. This option menu allows you to lock any TV channel or adjust the Movie rating filter.
6. Channel menu COLOR TV BROADCASTING AZORES(PORTUGAL) BALKANS(KOSOVO, BOSNIA) BELGIU M/GERMANY/ITALY IRAQ SYSTEM PAL B/G PAL BIG PAL BIG SECAM AFGHANISTAN NETHERLANDS/NORWAY PAL B PAL BIG SECAM SAUDIARABIA KUWAIT/TURKEY/JORDAN UNITED KINGDOM CZECH/HUNGARY/POLAND RUSSIA U.S.A./JAPAN/KOREA/GUAM Air/Cable: Allow you to select antenna between Air and Cable. If you selet "Cable", the following items(Favorite, Show/Hide, and DTV Signal) are unable to use.
Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired item, then press OK button to show or hide the highlighted Channel channel. No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press A / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, 18 Bad.
Dress the Power button on the TV or the remote control, then press the INPUT button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC". Place a disc Insert Disc according to picture next to disc slot. Do not touch the shinning surface. Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player.
5. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where you want to enter. 6. During Program Playback, if program button is repressed, the program order and the contents will be displayed on the screen, and the Program Playback will be stopped; also you can press Stop and Play to resume normal playback. 7. Notes: To clear the program order, use Arrow buttons to highlight the "CLEAR" item, then press OK.
2. While a disc is playing, press Repeat button once and the repeat banner appears to show current repeat mode. a) In SVCD, VCD, CD, HD-CD, WMAor Digital Audio disc/JPEG sequence playback mode. Press Repeat button again to turn on repeat mode. Press the button again on the remote to turn to the next repeat mode. There are three repeat options: Off, Track Repeat and Disc Repeat. With each consecutive press of the button, the repeat mode switches.
3. a) b) c) Notes This feature does not work in Program Play mode. If PBC is on, it will turn off automatically when Search Playback starts. When playing WMA, MP3 / JPEG discs, Search Feature does not work. Changing the Soundtrack or Language 1. Compatible with DVD SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc/JPEG discs. 2. Press the LANGUAGE button to display current soundtrack. a) Press the button to switch soundtracks. b) Press the button again on the remote to turn to next soundtrack. 3.
3. The player will then start to play the first track, of the selected directory. 4. To change directories use the direction buttons. DVD System Operation System operation will define the setting of the set; these definitions will be stored until you change them again. General Steps of Setup Menu 1. Pause or Stop the player. Press DVD-SETUPon the remote control. The main menu will be shown as below. 2. Press the 1_/ 4}buttons to select the Icon of the desired section, e.g.
RATING The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection. 2. LANGUAGE SETUP The language setup options are illustrated below: - OSD LANGUAGE: The OSD will display in the language you choose. - AUDIO LANG: If the disc you are playing has the language you choose, it will output audio in that language.
Disc Care About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, "title". Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter. Track A segment of picture or music on a CD, Each track is numbered for searching.
HHHHHHHHHHHHHJ iiiiiiiiiiiiiiiiiiiiiiiiiii • Do not use other functions that are not mentioned in this user's manual. • In case a problem occurs with your LCD TV, please take the following steps first. • If you still have the problem, turn the power off and contact your dealer or an authorized service center. m __ m Problem The screen does not appear. The screen appears too slowly after the power is turned on. ActiOn Isthe power plug pulled out? Insert the power plug.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LCD Panel Panel Size 26" (measured diagonally) TFT LCD Contrast Ratio 1000:1 SOUND OUTPUT 6W x2 Max. Resolution 1366 x 768 Input Connector VIDEO 2 S-VIDEO 1 YPbPr 1 AUDIO (L/R) 2 PC IN 1 ; RF 1 Power Source AC 100-240V, 50/60HZ Power Consumption 80W o The cabinet design and electronics specifications improving the performance.
VIORE TMLIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.
VIORE, Inc.
