GNV34DBE2 GAMING MONITOR USER MANUAL In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials.
Table of Contents Section 1: Safety Precautions.............................................................................4 Section 2: Box Contents......................................................................................5 Section 3: Product Overview...............................................................................6 3.1 – Monitor Buttons......................................................................................6 3.2 – Monitor Ports......................................
Section 1: Safety Precautions Read and observe the following warnings and information below. 1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again. 2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor. 3. This monitor features ventilation openings on the back of the unit.
Section 2: Box Contents Monitor x 1 Stand Stem x 1 26mm 26mm Power Cable x 1 (AC 100-240V, 50/60Hz) 35mm 35mm NO. 1 Screws x 4 (for Stand Installation) Stand Base x 1 NO. 2 Screws x 4 (for Wall Mounting) Headphone Clip Screwdriver x 1 Extra screws may be included as backup.
Section 3: Product Overview 3.1 – Monitor Buttons 1 2 3 4 5 6 5 M Menu Button: Press to display the OSD menu or enter sub-menus. Down Button: Press to move down in the menus. Up Button: Press to move up in the menus. E Exit Button: Press to exit. Power Button: Press to turn the monitor on/off. 6 LED Indicator: Changes colors to indicate status. Refer to Section 7.
Section 4: Stand Installation Keep the foam underneath the monitor before attaching the stand. 1. Open the package and take out the monitor with foam still attached. Gently place it top-down on a desktop or table. 2. Take out the stem, cable clip and base. Use the included screwdriver and one screw to fasten base to the stem. Headphone Clip Stand Stem Base Screw x 1 3. Remove the foam covering the bottom of the monitor, then remove the adapter from the back of monitor. Use two NO.
Section 5: Mount Installation 1. Open the package and take out the product with foam still attached. Gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor is already attached to the stand, remove the stand. Button 2. Press the button to remove the adapter on back of monitor, then tighten the included four NO. 2 screws onto the mounting holes on back of monitor. NO. 2 Screws x 4 3. Install the monitor on the wall, mount, or fixture as desired.
Section 6: Basic Operation 1. Insert one end of the DisplayPort (DP) cable into your PC’s graphics card. An HDMI cable (not included) can also be used. A DP cable is included for your convenience. 2. Connect the other end of the cable to the corresponding port on your monitor. Power Connector DP Ports Audio Connector HDMI Ports 3. Connect the power cable to your monitor then connect the other end to your power source.
Section 8: OSD The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M ( ) button. When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration. 1. Press any one of the buttons (M, , , E, ) to activate the navigation window. eco 2. Press M ( ) to enter the OSD menu.
8.1 – OSD Menu Functions Main Menu Input Source Brightness/ Contrast Sub-Menu Options Description DP1; DP2 NONE Switch to DP signal input HDMI1; HDMI2 NONE Switch to HDMI signal input Brightness Black level Contrast 0~100 0~100 0~100 On Off 1.8, 2.0, 2.2, 2.4, 2.
Main Menu Sub-Menu Options Description OSD Language English, Español, Русский, Français, 한국, 日本語, 简体 中文 0-100 0-100 0-100 Set OSD language 5-100 Set how long the OSD remains open after non-use When the user flips the display, this function can also flip the OSD to achieve the best display angle Select DP version OSD H-Position OSD V-Position OSD Transparency OSD Time Out Other OSD Rotation Normal, 90, 180, 270 DP Version DP1.1, DP1.2, DP1.
Section 10: Troubleshooting 10.1 – General Problems The screen is blank • Press the power button to turn on the monitor. • Confirm the brightness and contrast settings are set normally. • Check if the indicator light is flashing. If so, there is no signal from your video source. • If your source is a notebook or laptop, be sure that its settings are in mirror or extension mode and the device itself is powered on. The image is out of focus • Ensure the video cable is inserted properly at both ends.
10.2 – PIP (Picture in Picture) Input Information Mode Primary Screen Source Picture in Picture Additional Source DP Mode 1 Mode 2 Note: ” DP HDMI Swap Windows Picture Mode HDMI X X ” means this feature is supported while “X” means it is not supported. 10.3 – PBP (Picture by Picture) Resolution Information While using this feature and in order to obtain an optimal viewing experience, it is recommended to set both panels to the same resolution.
Section 11: Cleaning The monitor needs cleaning. Take the following steps when cleaning. Do not press the monitor display with hands or other objects; otherwise, there is a risk of damaging the screen. 1. Power off the monitor and PC. 2. Disconnect the power cord from the product. Do not touch any cords or cables wet hands. Electric shock may result. 3. Use a dry, non-abrasive cloth to gently remove dust and debris. 4. Lightly wet another soft cloth in water. Ring the cloth out well.
Section 12: Specifications Item Model Number Screen Size Curvature Viewing Angle Aspect Ratio Resolution Backlight LED Indicator Brightness Default Color Temp. Color Gamut Contrast Ratio Dot Pitch Response Time Refresh Rate Detail GNV34DBE2 34” 1500R H178°/ V178° 21:9 3440 x 1440p E-LED Power on: Blue (solid); Power saving: Blue (flashing) Typ: 350 cd/m2 ; Min: 320cd/m2 6500 99% sRGB; 85% NTSC; 90% DCI-P3; 85% Adobe RGB 3000:1 (typical) 272.4 x 272.
Section 13: Three-Year Limited Hardware Warranty Your VIOTEK® GNV34DBE2 Curved Gaming Monitor (“Product”) includes a Three-Year Limited Hardware Warranty (“Warranty”). The Warranty covers product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and Canada only and is available only to original purchasers. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
COPYRIGHT © 2021 VIOTEK. ALL RIGHTS RESERVED.
