RFI25CBA GAMING MONITOR USER MANUAL In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials.
Table of Contents Section 1: Safety Precautions................................................................4 Section 2: Box Contents..........................................................................5 Section 3: Product Overview..................................................................6 3.1 – Rocker Button.............................................................................6 3.2 – Monitor Ports..............................................................................
Section 1: Safety Precautions Read and observe the following warnings and information below. 1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again. 2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor. 3. This monitor features ventilation openings on the back of the unit.
Section 2: Box Contents Monitor x 1 Stand Stem x 1 Stand Base x 1 Power Adapter x 1 (DC 19V, 3.
Section 3: Product Overview 3.1 – Rocker Button 1 1 2 3 4 5 2 3 4 5 Press Rocker up: Crosshairs shortcut; OSD menu navigation. Power Button: Turn off monitor (longpress); put monitor to sleep (quickpress) Press Rocker to the left: RGB Range/Port Selection shortcut. When connecting a Type-C device (phone, laptop, etc.) and using the monitor in portrait mode (vertical position), long-press the Rocker to the left to open the Port Selection shortcut menu.
Section 4: Stand Installation Keep the foam underneath the monitor while attaching the stand. 1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Stand Base Foam Stand Stem Monitor Foam 2. Take out the two main parts of the stand and remove the foam covering the top of the monitor. Release the screw attached on the base, then attach the stand base to the stand stem. Tighten the screw back to the base. Stand Stem Screw x 1 Stand Base 3.
4. Place the monitor on your desktop or table after completing installation. To avoid damage, do not touch the screen when moving the monitor. 5. Carefully adjust monitor’s height, angle and/or orientation as desired. Orientation adjust 90o Height adjust 4.72 ±0.20 in.
Section 5: Wall Mounting This monitor includes screws that may only be used when attaching the monitor to a mount. No mount or mounting accessory is included. 1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor was already attached to the stand, remove the stand. Stand Base Foam Stand Stem Monitor Foam 2.
Section 6: Basic Operation 1. Insert one end of the DP cable (included) into your PC’s graphics card. An HDMI cable (not included) or, in some cases, a USB Type-C cable can also be used. Monitor resolution can be limited based on the input/cable used (i.e., DP vs HDMI). 2. Connect the other end of the cable to the corresponding port on your monitor. HDMI Ports Audio Out DP Port Type-C Port 3. Connect the power cable to your monitor, then connect the other end to your power source.
Section 8: OSD The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing Rocker to the right. When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration. 1. The shortcut keys of the Rocker button. Gameplus crosshairs Color switch shortcut Power button OSD main menu Color profile shortcut 2. Press rocker to the right to enter the OSD screen.
8.
Main Menu Sub-Menu Options Description Picture Quality Setting Sharpness 0~100 Response Time Noise Reduction Off, High, Middle, Low Off, High, Middle, Low Adjust the clarity and visibility of the edges in the image Activate and adjust overdrive function to decrease response time Reduce the interference of image noise caused by signal source interference Super Resolution Off, High, Middle, Low Enhance image quality of upscaled images Dynamic Luminous Control On, Off Auto compensation for gray s
Main Menu Sub-Menu Options OSD Set OSD language English， 简体中文， 한국어，Русский, Español, 日本語, Français 0-100 Adjust the OSD’s horizontal position Language Description OSD H-Position OSD 0-100 V-Position OSD 0-100 Transparency Other Adjust the OSD’s vertical position Set the OSD’s overall transparency OSD Time 5-100 Out OSD Rotation Normal, 90, 180, 270 Set how long the OSD remains open after non-use Adjust the OSD menu orientation based on the monitor’s orientation (vertical vs horizontal) DP Version
• • • The monitor can provide power to your connected mobile device when connected via Type-C. When using the monitor in vertical position (portrait mode) for the first time, set a proper resolution ratio on your computer; otherwise, the monitor may not display properly. Always select the correct Type-C device type for the Port Select pop-up. The connected Type-C device (tablet, smartphone, etc.) and the USB-C cable must support DP ALT-MODE. Section 10: ECO Modes and Gameplus Switching 1.
Section 11: Troubleshooting 11.1 – General Problems The screen is blank • Press the power button to turn the monitor on. • Confirm the brightness and contrast settings are set normally. • Check if the indicator light is flashing. If so, there is no signal from your video source. • If your source is a notebook or laptop, make sure it’s powered on and set to mirror or extension mode. The image is out of focus • Make sure the video cable is inserted properly at both ends.
Dim image • Adjust the brightness and contrast ratio. Image jitter/moire pattern • Nearby electric equipment may be interfering with the monitor. Light indicator is on or flashing, but there is no image displayed on screen • Check if the monitor power is on. • Check if the graphics card is installed properly. • Make sure the power cable is properly connected to the monitor and power source. Image position is not centered/the size is not right • Please adjust Clock or Auto settings.
PBP Phone Mode 1 2 It is recommended to set the first panel to 1440 x 1080 resolution. It is recommended to set the phone panel to 480 x 1080 resolution. At this resolution, tearing and visual deformation should be minimized. Section 12: Cleaning Take the following steps when cleaning the monitor. Do not press the monitor display with hands or other objects; otherwise, there is a risk of damaging the screen. 1. Power off the monitor and PC. 2. Disconnect the power cord from the product.
Section 13: Information 13.1 – Specifications Item Detail Model Number Screen Size RFI25CBA 24.5’’ Viewing Angle Aspect Ratio Resolution Backlight Typical Brightness Default Color Temperature Colors Contrast Ratio Pixel pitch Response Time Refresh Rate Ports 178°/178° (H/V) 16:9 1920 x 1080p E-LED 250 cd/m2 (min); 300cd/m2 (max) 6500 sRGB 98%; NTSC 85% 1000:1 0.2832 mm x 0.2802 mm (H x V) 5ms (OD), 1ms MPRT 144Hz 1x DP, 2x HDMI, 1x 3.5 Audio Out, 1x Type-C Power OSD Language 65W (19V 3.
13.2 – Resolution Compatibility for DP System Requirements below are the minimum system requirements for your RFI25CBA monitor. The requirements are recommended in order to properly use all of the monitor’s features and ensure high-quality picture.
Important: Do not disassemble the Product. Disassembling the Product will void this Warranty. Only WP or a party expressly authorized by WP should perform service on this Product. DISCLAIMER OF WARRANTY: THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED WARRANTY.
COPYRIGHT © 2021 VIOTEK. ALL RIGHTS RESERVED.
