Product manual

4 Viper 200 LTO Product Manual
Features Benefits
Supports native firmware of a wide
variety of UNIX platforms
Reduced set-up and configuration time
Support for Ultra SCSI-2
Low Voltage Differential,
High Voltage Differential, and
Fibre Channel interfaces
Compatible with the today’s and tomorrow’s high-
performance interfaces
Remote diagnostics Increases data safety through monitoring and
testing capabilities; Individual feature set or private
label capabilities for each system OEM and
automation manufacturer
Support for SCSI-2 and some SCSI-3
instructions
Extra control of drive from the host system
Specification summary
Specification Value
Tape Format
LTO (Ultrium)
Capacity
100 Gbytes (native) 609m cartridge
50 Gbytes (native) 319m cartridge
30 Gbytes (native) 203m cartridge
10 Gbytes (native) 87m cartridge
Performance
16 Mbytes per second (native) with FastSense™
Dynamically adjustable to: 14, 12, 10, 8 Mbytes /second
Models
Internal - LVD: STU42001LW; HVD: STU42001WD
External - LVD: STU62001LW; HVD: STU62001WD;
Fibre Channel: STU42001FC
Form Factor
5.25” Full-Height (internal drive)
Interfaces
LVD
HVD
Fibre Channel – LC Optical Multimode
RS-422 Serial Port
Tape Speed
4 meters per second at 16 Mbytes per second
Search Speed
4 meters per second
Heads: 8 channel
Recording Density: 93K fci
Data Density: 124K bpi
Data Tracks: 384
Data Track Density: 768 tracks per inch
Recording
Servo Tracks: 5
Error Rate
Less than one error in 10
17
bits read (w/error correction)
(Error rate before ECC: 6 errors in 10
7
bits read)
Idle (tape loaded): 14 watts
Streaming RWW: 25 watts
Ramp up (peak): 35 watts (0.8 sec)
Ramp down (peak): 27 watts (0.8 sec)
Load/Unload (peak): 15 watts (0.2 sec)
Power Consumption
(typical) Ultra 2
SCSI LVD, Ultra
SCSI HVD
Thread/Unthread
(peak):
23 watts (0.2 sec)
Idle (tape loaded): 19 watts
Streaming RWW: 25 watts
Ramp up (peak): 35 watts (0.8 sec)
Power Consumption
(typical) Fibre
Channel
Ramp down (peak): 27 watts (0.8 sec)