Product manual

22 Viper 200 LTO Product Manual
13 Lib TXD-P output from drive
14 GND
15 Lib TXD-N output from drive
16 GND
Connecting a power cable
Attach a four-pin power cable to the power connector on the back of the drive.
Figure 5 on page 20 shows the location of the power connector.
The recommended 4-pin power connector for the internal Viper 200 is an AMP 1-
48024-0 housing with AMP 60617-1 pins or equivalent.
Power connector
The following table lists pin assignments of the power connector for the internal
SCSI and Fibre Channel Viper drives.
Pin Assignment
1 +12 VDC power
2 +12 VDC return
3 +5 VDC return
4 +5 VDC power