The company behind Viper® Auto Security Systems is Directed. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security and accessories available. The recipient of nearly 100 patents and ® Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and serviced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services.
Congratulations Congratulations on the purchase of your state-of-the-art remote start and keyless entry system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features.For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. (U.S. only) Additional Guide Information Only basic commands, features and essential information are covered in this compact guide.
Your Warranty Your system comes with a warranty. The warranty terms are detailed at the end of this guide. Make sure that you receive the proof of purchase from your dealer, indicating the product was installed by an authorized Directed dealer. Replacement remote controls Please see your authorized dealer or visit us at www.directedstore. com to order additional remote controls. Remote control part numbers are found on the back of the device.
Contents Remote Control Information .................................................................................. 2 Control Center .................................................................................................... 3 Status Screen Icons .............................................................................................. 4 Using your System ............................................................................................... 7 Commands and Confirmations .............
Remote Control Information Feature Description Internal Antenna Used for transmitting and receiving information Display Status screen - the upper portion of the display contains status icons for the System, Remote Start and Remote Control.
Control Center LED Control Center Button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: • • • The In-vehicle system antenna, for 2 way communication. The Status LED, as a visual indicator of the system’s status. The Control button, for placing the system into Valet Mode* and to perform the Emergency Override** operation. * See “Remote and System Operations” in online guide.
Status Screen Icons Status Screen Icons ALL 1 Text Field The table below describes all the status screen icons. Icon Description System Status Locked: The system is locked. Locked: The system is Locked in Valet. Unlocked: The system is Unlocked. Unlocked: The system is Unlocked in Valet. Remote Start Remote start is active, the engine is running. Timer mode is On; Remote Start is On.
Icon Description Remote Start Displays the vehicle interior temperature On during Remote Start after performing the Defogger On command On during Trunk channel activation On during the Factory Security Full Trigger output (see System Features) On during Fault Report to indicate a Door is open when locking.
Icon Description On after the Garage Open** message has been received. On after the Garage Closed** message has been received. * This icon not present until the Car 2 is turned on in the Setup Remote configuration menu. ** This icon not present until the remote is paired with an optional garage door opener. 6 © 2013 Directed. All rights reserved.
Using your System Commands and Confirmations Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used and remote start features while Advanced commands control more specialized features and request reports. Confirmations for Basic or Advanced commands are indicated first by horn honks and parking light flashes, and then by Text, Icons and beeps or tones on the remote control.
Responder LC Command table Level Direct Access Button x1 LEVEL 1 Lock x2 x3 LEVEL 2 LEVEL 3 x4 LEVEL 4 Silent Lock (Panic) UnLock Silent UnLock Remote Valet Car Finder Remote Start Runtime Timer Start Smart Start Defogger AUX 3 AUX 4 Reset AUX Aux/Trunk AUX 1 AUX 2 Advance Level Temperature Runtime Change Car Check Remaining (3s), Enter programming (8s) Fault Condition Alerts If, when performing a command, a condition exists that does not allow activation of a Remote Start f
Basic commands (Direct Access) Lock ALL 1 Press and release 6:30 The doors lock and the horn honks (if connected) and parking lights flash once. The LOCKED text and beeps play to confirm and the System Status Icons update. If Valet mode* is On the doors lock and the VALET text and tone play. Exit Valet mode to Lock the system normally. If the door was open when locking, you are notified of an active zone immediately after locking the system. The horn in the vehicle “honks” again.
AUX/Trunk Press and hold AUX The Trunk opens (if connected) when this button is pressed for 2 seconds. The TRUNK text and tones play to confirm. Remote Start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the REMOTE START ON text and tones play, or the engine and parking lights turn Off and the REMOTE START OFF text and tones play to confirm, the Remote Start status icons update.
Responder LC configuration Operations of the Responder LC and how it communicates messages are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings. Button operation • • • To access menus, set options, and to perform actions that are displayed in the text field, use the button.
1-way Companion Remote Control Level Direct Access x1 Button x2 LEVEL 1 Lock x3 LEVEL 2 LEVEL 3 x4 LEVEL 4 Silent Lock (Panic) Unlock Silent Unlock Remote Valet Car Finder Remote Start Runtime Timer Start Smart Start Defogger AUX 2 AUX 3 AUX 4 Reset AUX Aux/Trunk AUX 1 Not Used Used to access function levels for Advanced Commands ( with multiplier in top row implies button presses) Using the 1 way companion remote The companion 1 way remote commands the system features as shown
Battery Information (Responder LC) The Responder LC remote control is powered by an internal rechargeable battery that can be serviced only through an authorized Directed dealer. Warnings! NEVER use a cable other than the one provided or plug into an unspecified source. Injury, severe damage or explosion may occur when connected to any other products or used in a way not intended.
Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending. 14 © 2013 Directed. All rights reserved.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Control Center To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210.
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control transmitter.
Before remote starting a manual transmission vehicle, be sure to: • Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. • Only remote start on a flat surface • Have the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emergency brake properly functions. Failure to do so can result in personal injury or property damage.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Limited lifetime consumer warranty Directed Electronics.
OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.