Owner's Manual

1
© 2008 Directed Electronics. All rights reserved.
Addendum
The following list addresses errors/inconsistencies found in both the 4202 Instal-
lation guide (N4202 2008-06) and Owner's guide. (G4202 2008-06):
Installation guide
Page Description/error Correction
inside
cover
Error is found in the
Bitwriter® chip version
requirement: version 2.5
The Bitwriter (p/n 998U) requires
chip version 2.6 or newer to program
this unit.
56 Error is found in Feature
3-15: "temperature auto
report"
This unit does not have the tempera-
ture auto report feature.
59 Error is found in the "To
activate Valet-take over"
section; Step #1: the (RS
icon) button.
Before turning the engine Off, press
and release the
A U X
button.
61 Important information
was left out of the Timer
Mode explanation.
The system must be locked for Timer
Mode to operate.
Owner's guide
Page Description/error Correction
12 Error is found in the Un-
lock icon Command text:
"Press one time to Lock"
Press one time Unlock
25 Important information was
left out of the Timer Mode
explanation.
The system must be locked for Timer
Mode to operate.
ADN4202 2008-06.