User Guide

1. With the engine running, set the parking brake and release the

foot brake.

2. Press the

AUX

button, the parking lights will turn on and the

REMOTE START ON

message will play on the remote control.

3. Turn the key to off, and remove it from the ignition, the engine

continues running for the programmed runtime.

4. Exit the vehicle and arm the alarm.

Note

For Pit Stop Mode on manual transmission vehicles follow

the directions in the MTS Mode (Manual Transmission Start)

section with the door open.

MTS Mode (Manual Transmission Start)

When installed into a manual transmission vehicle, the system requires

that the MTS Mode is properly set when parking. If MTS Mode is not

properly set or is defeated after being properly set, the system will not

start the engine and the

REMOTE START ERROR

text and tones play as

an alert.

1. With the engine running, place gear shifter in neutral position,

press the foot brake, then set the parking brake and leave the

engine running. For Pit Stop Mode (to leave the engine running

after arming), open the driver door..

2. Release the foot brake. As long as the engine is running there is

no time limit to perform this step.

3. Within 20 seconds of foot brake release, press any command

button on the remote, after 20 seconds return to Step 2 (For Turbo

Timer Mode, press the optional dash mounted activation button

or send the Timer Mode command).

4. The parking lights ﬂash ﬁve times to conﬁrm MTS Mode en-

able and the remote start activates the ignition outputs. The