User Guide

Battery

two systems independently. When set to Off, the Car Select feature

is not available. When set to On, the Car Select feature is enabled.

See “Car Select” (under Remote and System Operations) for detail on

using a remote with two systems.

Remote Pairing

Please note that your remote controls come already paired from the

factory. However, if you wish to add a new remote control, the fol-

lowing instructions step you through pairing the 1-way remote control

to your system.

Note: Both the remote and the vehicle will need to be prepared to

pair a remote to the system.

Prepare the remote for pairing:

1. Make sure the remote control is set for the desired Car 1 or Car

2 operation.

2. Press and hold the

AUX

button for eight seconds, the transmit LED

will turn on, release the

AUX

button.

3. Within 30 seconds press and hold the

AUX

button for two sec-

onds, the transmit LED ﬂashes then comes on, release the

AUX

button.

4. The remote is now ready for pairing.

Prepare the vehicle system for pairing:

1. Open at least one of the vehicle’s doors.

2. Turn the key to the ON position.

3. Within ﬁve seconds, press and release the Control Button on the

Control Center one time.

4. Within ﬁve seconds, press and hold the Control Button. The sta-

tus LED will begin ﬂashing and the siren will sound one time to