User Guide

Getting Started

Your Responder LCD remote is powered by an internal rechargeable

battery that can only be serviced by an authorized Directed dealer.

Due to transit and storage time prior to your purchase, the battery

charge may have depleted. To ensure proper operation, check the

battery level and if not fully charged, use the provided cable to con-

nect to the USB port on a computer. See “Battery Information (Re-

sponder LCD Remote)” on page 53 and “Status Screen Icons” on

page 8 for more information about the battery.

Charging the remote control:

1. Plug the USB end of the provided USB cable into the USB port

on a computer. Insert the micro-USB connector into the micro-

USB port located on the side of the remote control. The text ﬁeld

will display

CHARGE

to indicate the remote control is charging

(The remote remains operational while charging and can com-

mand the system).

2. Once fully charged the text ﬁeld will display

FULL

3. The remote control is then ready for use. Disconnect the cable

from the remote control end ﬁrst.

Note

If the battery is excessively depleted when charging, func-

tionality may be delayed while it charges to the minimum

voltage required to operate the display, after which normal

charging resumes.