User Manual FOAM GENERATOR DF-100A-EU HQJOLVK 2SHUDWLQJ ,QVWUXFWLRQV GHXWVFK %HWULHEVDQOHLWXQJ [[[ IUDQçDLV 1RWLFH G’XWLOLVDWLRQ [[[ QHGHUODQGV *HEUXLNVDDQZLM]LQJ [[[ LWDOLDQR ,VWUX]LRQL VXOO’XVR [[[ HVSDñRO ,QVWUXFFLRQHV GH P
USER MANUAL ENGLISH TABLE OF CONTENTS INTRODUCTION ................................................................................................................................................................. 2 MANUAL PURPOSE AND CONTENTS .......................................................................................................................................... 2 TARGET........................................................................................................................
ENGLISH USER MANUAL INTRODUCTION NOTE The numbers in brackets refer to the components shown in Machine Description chapter. MANUAL PURPOSE AND CONTENTS The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
USER MANUAL ENGLISH CHANGES AND IMPROVEMENTS Viper constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefits to the machines that were previously sold. Any change and/or addition of accessories must be approved and performed by Viper. OPERATION CAPABILITIES These machines are used to clean carpet, under safe operation conditions by a qualified operator.
ENGLISH USER MANUAL GENERAL INSTRUCTIONS Specific warnings and cautions to inform about potential damages to people and machine are shown below. – – – – – – – – – – – – – – – – – – – – – – – – – – – DANGER! Always disconnect the power supply cable when the machine is not in use, before performing maintenance procedures and before opening any access panel. This machine must be used by properly trained and authorised personnel only. Children or disabled people cannot use this machine.
USER MANUAL – – – – – – – – – – – – – – – ENGLISH The humidity must be between 30% and 95%. Do not use the machine as a means of transport. In case of fire, use a powder fire extinguisher, not a water one. Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously. Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged.
ENGLISH USER MANUAL MACHINE DESCRIPTION MACHINE STRUCTURE 1. 2. 3. 4. 5. 6. 7. Form Outlet Body, Foam Generator Knob, Foam Filter Knob, Foam Adjusting Solution Inlet Bracket, Foam Generator MNTG Power Supply Cord 6 DF-100A-EU 8. 9. 10. 11. 12. 13.
USER MANUAL ENGLISH TECHNICAL DATA Model Voltage DF-100A-EU 230V̚ Frequency 50HZ Power 150W Current 1.0 A IP Class IP 44 Volume of solution tank 6 Liters Sound pressure level at workstation 68dB(A) Weight Length of Power cord 14019E (1) 2010-12 A 6kg 1.
ENGLISH USER MANUAL WIRING DIAGRAM FOR DF-100A-EU 8 DF-100A-EU 14019E (1) 2010-12 A
USER MANUAL ENGLISH OPERATION OF FOAM GENERATOR BASIC OPERATION Please follow the instructions to achieve the top performance. 1] Installation: a. Set Viper VE Model Polishers (A) at the up-right position and install 2 sets Accessory Clamp (C) on the tube of polisher. b. Install the Foam Generator (B) on the polisher. b1. Put the ends of Bracket (D) in the slot of Accessory Clamp (C). b2. Fasten the Knob (E) and lock up the Accessory Clamp (B) b3.
ENGLISH USER MANUAL MAINTENANCE To keep the machine performing well for many years, please follow the following maintenance procedures. DGNGER! Always confirm that the machine is unplugged prior to performing any maintenance or repairs. 1] Unplug machine as soon as you are not using it. 2] Check machine for loose or missing nuts and bolts, and replace as necessary. 3] Foam filter (12), Inlet Filter (11) and Solution Filter (13) need to be cleaned periodically.
