User Manual GVD10-EU SD18-EU DV-10 english deutch francais nederlands italiano espanol portugues User Manual…………………………………………….1-9 Betriebsanleitung……………………………………… xxx Notice d’utilisation …………………………………….. xxx Gebruiksaanwijzing……………………………………. xxx Istruzioni sull´uso……………………………………… xxx Instrucciones de manejo……………………………… xxx Instruções de operação……………………………….. xxx Company information: WWW.vipercleaning.eu info-eu@vipercleaning.
USER MANUAL ENGLISH TABLE OF CONTENTS INTRODUCTION .............................................................................................................................................................. 2 MANUAL PURPOSE AND CONTENTS .......................................................................................................................................... 2 TARGET...........................................................................................................................
ENGLISH USER MANUAL INTRODUCTION (CAUTION: Read the instruction manual before using the appliance) NOTE The numbers in brackets refer to the components shown in Machine Description chapter. MANUAL PURPOSE AND CONTENTS The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
USER MANUAL ENGLISH CHANGES AND IMPROVEMENTS VIPER constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefits to the machines that were previously sold. Any change and/or addition of accessories must be approved and performed by VIPER.
ENGLISH USER MANUAL GENERAL INSTRUCTIONS Specific warnings and cautions to inform about potential damages to people and machine are shown below. – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – DANGER! Always disconnect the power supply cable when the machine is not in use, before performing maintenance procedures and before replacing parts or converting the appliance to another. This machine must be used by properly trained and authorised personnel only.
USER MANUAL – – – – – – – – – – – – – – – – – ENGLISH The humidity must be between 30% and 95%. Do not use the machine as a means of transport. Do not use the machine on slopes with a gradient exceeding the specifications. In case of fire, use a powder fire extinguisher, not a water one. Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously. Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged.
ENGLISH USER MANUAL MACHINE DESCRIPTION MACHINE STRUCTURE 1. 2. 3. 4. 5. Carring handle On/off switch Snap handle Hose intake Casters 6. 7. 8. 9. 10.
USER MANUAL ENGLISH STANDARD ACCESSORY SET 1. 2. 3. 4. 5. Combination tool Upholstery tool Dusting tool Crevice tool Tube Paper bag Filter basket with cotton cloth Hose Filter 6. 7. 8. 9. 9 8 1 2 3 4 5 5 6 7 TECHNICAL DATA Model Voltage SD18-EU SCRU 220 V-240V GVD10-EU S V-240V 220 DV-10 220SV-240V Power 1000W 1000W 1000W Current 4.5 A 4.5 A 4.
ENGLISH USER MANUAL WIRING DIAGRAM FOR SD18-EU GVD10-EU SWITCH 220V~240V 50/60HZ SINGLE PHASE SUPPLY EMI BROWN BROWN BLUE BLUE Motor GREEN GREEN H05RN-F 3X0.75 Power Supply Cord WIRING DIAGRAM FOR DV-10 SWITCH 220~240V 50/60HZ SINGLE PHASE SUPPLY BROWN BROWN BLUE BLUE Motor H05VV-F 2X0.
USER MANUAL ENGLISH OPERATION OF VACUUM CLEANER BASIC OPERATION 2 ﹡Be sure the machine is not plugged into an outlet and confirm that there is either a cloth or a paper filter in place. 1] Connect vacuum hose(1) to inlet (2) on the machine body. 1 4 1 2 1 3 min. 2] Firmly connect the suction tube parts (1), twist the tubes in order to ensure that they are properly fitted. 3] Connect the suction tube (1) to the suction hose (2).
ENGLISH USER MANUAL 5] Check the filter, and clean it after each use. 6] Remove the vacuum hose and check it for any holes and clogs. 7] Clean the outside of the machine, accessories and mains cord with a damp cloth after use. 8] Immediately switch off the vac, if an obstruction is noticed (generally indicated by reduced suction power), Check the fill level of the paper dust bag; replace bag if 2/3 full, Check nozzle, suction tubes and suction hose for blockage.