User Manual Original instructions VE 17P-EU VE 17HDP-EU VE 17DSP-EU VE 17HSP-EU Company information: www.vipercleaning.eu info-eu@vipercleaning.
USER MANUAL ENGLISH TABLE OF CONTENTS Introduction............................................................................................................................................................... 4 Manual purpose and contents........................................................................................................................................... 4 Target...........................................................................................................................
ENGLISH USER MANUAL Introduction NOTE The numbers in brackets refer to the components shown in Machine Description chapter. Manual purpose and contents The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
USER MANUAL ENGLISH Conventions Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working position with the handle. Unpacking/Delivery To unpack the machine, carefully follow the instructions on the packing. When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible damages, keep the packing and have it checked by the carrier that delivered it.
ENGLISH USER MANUAL Do not use the machine as a means of transport. In case of fire, use a powder fire extinguisher, not a water one. Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously. Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the openings free from dust, hairs and any other foreign material which could reduce the air flow.
USER MANUAL ENGLISH Floor coverings CAUTION Damage to sensitive floor coverings. Particularly sensitive floor coverings can be damaged by cleaning. Before using the cleaner, check whether floor coverings are suitable for this cleaning technique. Beware of area compression in point-elastic floors, e.g. in gym halls. Only use cleaning agents approved by Viper. Materials hazardous to health WARNING Materials hazardous to health in floor coverings.
ENGLISH USER MANUAL MACHINE DESCRIPTION MACHINE STRUCTURE (1) Guide Handle (11) Motor Cover (2) Switch Lever, Right (12) Power Cord (3) Adjustment Lever (13) Strain Relief (4) Shaft (14) Lever Solution (5) Cord Wrap (15) Switch Lever, Left (6) Switch Plug (VE17P-EU, VE17HDP-EU, VE17HSP-EU), (16) Button interlock Switch(H/L speed) (VE17DSP-EU) (17) Pad Driver (7) Wheel (18) Pad (8) Barb Hose (19) Brush (9) Bumper (10) Mainframe 8 (20) Solution tank assembly VE17P-EU VE17HDP-EU VE17DSP-EU VE17
USER MANUAL ENGLISH TECHNICAL DATA VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU Voltage Model V 220 – 240 220 – 240 220 – 240 220 – 240 Power W 750 1120 1125/1500 1500 Current A 4.6 7 7.2/9.5 9.8 Frequency Hz 50-60 50-60 50-60 50-60 Brush Speed rpm 150 150 150/300 300 Brush Diameter cm 43.2 43.2 43.2 43.2 Dimension LxWxH cm 53.6 x 43.2 x 121.9 53.6 x 43.2 x 121.9 53.6 x 43.2 x 121.9 53.6 x 43.2 x 121.
ENGLISH Socket USER MANUAL Black insert translation insert translation Handle Cord insert translation Red insert translation Motor Cord insert translation White insert translation Running Capacitor insert translation Orange insert translation Starting Capacitor insert translation Yellow insert translation Green insert translation Operation BEFORE STARTING THE MACHINE ASSEMBLY For transport reasons the motor head and shaft are supplied not assembled.
USER MANUAL ENGLISH NOTE Never change the speed while operating the machine. Be sure the power is turned off prior to changing the speed. Select either low speed {150 rpm} or high speed {300 rpm} by pushing the motor mounted switch (1) into the low or high position (Only for VE17DS). When the machine is in operation, both hands should be placed on the switch housing {up- per handle}. During operation, to make the machine go right, gently raise the handle.
Company information: www.vipercleaning.eu info-eu@vipercleaning.
