Owner`s manual

Entering The Liftgate With The System Armed

NOTE: Using the key to open the liftgate while the

Vehicle Security Alarm is armed will trigger the alarm.

Press the LIFTGATE release button on the RKE transmit-

ter twice to allow access without triggering the alarm or

having to disarm the Vehicle Security Alarm. Then,

within 30 seconds, open the liftgate by using the key

cylinder or the LIFTGATE release switch located in the

exterior liftgate handle.

To Disarm The System

The Vehicle Security Alarm can be disarmed using any of

the following methods:

• Press the UNLOCK button on the Remote Keyless

Entry (RKE) transmitter.

• Cycle the vehicle ignition system out of the OFF

position.

• Press the Keyless Enter-N-Go™ Start/Stop button

(requires at least one valid Key Fob in the vehicle).

NOTE:

• The liftgate key cylinder cannot arm or disarm the

Vehicle Security Alarm.

• When the Vehicle Security Alarm is armed, the interior

power door lock switches will not unlock the doors.

The Vehicle Security Alarm is designed to protect your

vehicle; however, you can create conditions where the

system will give you a false alarm. If one of the previ-

ously described arming sequences has occurred, the

Vehicle Security Alarm will arm regardless of whether

you are in the vehicle or not. If you remain in the vehicle

and open a door, the alarm will sound. If this occurs,

disarm the Vehicle Security Alarm.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15