Owner`s manual

BULB REPLACEMENT

Front Headlamp, Front Park/Turn Signal Lamp

For bulb replacement, see your authorized dealer.

Front/Rear Side Marker Lamp

1. Remove the front/rear side marker. Use a fiber stick or

similar tool to gently pry the lamp on the outboard

side to disengage the clip.

NOTE:

• If a screwdriver is used, make sure a soft material is

placed between the vehicle body and tool so not to

scratch the paint.

2. Rotate the bulb’s socket counterclockwise, and remove

the bulb and socket assembly from the housing.

3. Pull the bulb out of the socket and insert the replace-

ment bulb.

4. Install the bulb and socket assembly into the housing,

and rotate the socket clockwise to lock it in place.

5. Reinstall the front/rear side marker.

Taillamp, Tail/Stop Lamp

For bulb replacement, see your authorized dealer.

Rear Turn Signal Lamp

For bulb replacement, see your authorized dealer.

MAINTAINING YOUR VEHICLE 319