Owner`s manual

ENGINE STARTING/STOPPING

Starting

1. Fully apply the parking brake.

2. Press the clutch pedal to the floor.

3. Place the shift lever in NEUTRAL.

Press the red ENGINE STAR T/STOP but-

ton located on the instrument panel. Re-

lease the button when the engine starts.

NOTE:

The engine will not start unless the clutch

pedal is pressed to the floor.

Stopping

1. Bring the vehicle to a complete stop.

2. Fully apply the parking brake.

3. Press the clutch pedal to the floor.

4. Place the shift lever in NEUTRAL/1st Gear.

5. Press the ENGINE START/STOP button once. The ignition switch will return to the OFF

position.

SECURITY ALARM

To Arm:

Follow these steps to arm the V ehicle Security Alarm:

• Press LOCK on the interior power door lock switch with the driver and/or passenger door

open.

• Press the LOCK button on the Remote Keyless Entry (RKE) transmitter.

• The Vehicle Security Light in the instrument cluster will flash for 16 seconds. This

shows that the Vehicle Security Alarm is arming. During this period, if a door is opened,

the ignition is cycled to ON/RUN, or the power door locks are unlocked in any manner,

the Vehicle Security Alarm will automatically disarm.

NOTE:

• During the 16-second arming period, if a door is opened or the ignition is cycled to

ON/RUN, the Vehicle Security Alarm will automatically disarm.

• Once armed, the Vehicle Security Alarm disables the unlock switch on the driver door

trim panel and passenger door trim panel.

GETTING STARTED