Owner`s manual

SPEED CONTROL

• The Electronic Speed Control switches

are located on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate the

Speed Control.

• CRUISE

will appear on the instru-

ment cluster to indicate the Speed Con-

trol is on.

• Push the ON/OFF button a second time

to turn the system off.

SET

• With the Speed Control on, push and

release the SET – button to set a desired

speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will

increase or decrease the set speed approximately 1 mph (1.6 km/h).

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the

set speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory .

WARNING!

• Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou

could accidentally set the system or cause it to go faster than you want. You could

lose control and have a collision. Always leave the Electronic Speed Control system

off when you are not using it.

• Electronic Speed Control can be dangerous where the system cannot maintain a

constant speed. Y our vehicle could go too fast for the conditions, and you could lose

control. A collision could be the result. Do not use Electronic Speed Control in heavy

traffic or on roads that are winding, icy, snow-covered or slippery .

OPERATING YOUR VEHICLE