Air Conditioner User Manual

INS TRUCTIONS MA NUAL

M EASUREMENT SETTING

When power is turned on to your new VIPER VR-6000, the keypad display will show the gas

weight in the service tank. The display can be set to read in either metric or standard

measurements , proceed as follows:

• Switch offthe VR-6000.

• Press the SEL, GO, and ENTER keys simultaneously while turning on the VR-6000.

The machine will change from one system ofunits ofmeasurementto the other.

VIPER VR-6000 SPECIFICATIO NS

Ele ctrical Input: 115 Vac , 8 A , 60 Hz

AmbientOperating Temperature Range: 50° F (10° C) to 120° F (48.9° C)

Approximate Shipping Weights: 170 lbs.

PREPARATION FOR USE

GENERAL

Your VIPER VR-6000 Air Conditioning Service Center is shipped completely assembled and

100% pre-tested. Your VIPER VR-6000 needs to be prepared before it can be used to

s ervice a vehicle's air conditioning s ystem .

PREPARATION

The following steps,for the most part, are used onlyto prepare your VR-6000 foroperati on.

1. Remove the shipping carton.

2. Lift outthe VR-6000 from the palletto the ground.

3. Loosen the scale hand screw (see Fi gure 9) that is under the scale platform. It is

tightened to preventdamage to the s cale during shipment. Turn counter clockwise six

full tur ns. Note: I fyou do notloosen the scale hand screw under the scale platform, the

scale will remain inoperable.