Instructions / Assembly

Installation

2.1 Installing Filter on Water Line

Note: Filter can be adapted to various pipes by using reducing adapters on either end. Installation fittings can be sweated

or threaded. Use galvanized fittings for installation on galvanized pipe.

Procedure:

NOTICE

Before starting, shut off the main water supply and drain pipes.

• Loose fit all parts and

calculate length of pipe to be

removed.

• Cut the pipe and install

fittings onto pipe.

• Screw filter to the adapter

after covering the threads

with Teflon

tape and make a

tight connection but do not

over tighten.

Note: If space is limited

remove sump from head

while making connection.

• Connect and tighten, making

sure filter is in a straight

vertical position.

Jumper Wire

Note: If water pipes are used

to ground electrical system,

appliances, or phone, install a

jumper wire.

By-pass section (optional):

• Use either threaded or

sweated fittings for bypass

section.