User guide

- 24 - - 25 -
Firewall Settings
Firewall settings are intended for advanced users and network
administrators.
There is usually no need to apply any settings in a home
environment.
Note: You can set up to a maximum of 10 filter items for MAC/IP/
Port Filtering and Port Forwarding.
MAC / IP / Port filtering
• Default Policy: Set how to handle the packet if none of the rules
match.
• MAC address: Set the MAC address to be filtered.
• Destination IP Address: Set the destination IP address to be
filtered.
• Source IP Address: Set the source IP address to be filtered.
• Protocol: Set which protocol to be used for filtering.
• Destination Port Range: Set the destination port numbers to
be filtered
• Source Port Range: Set the source port numbers to be filtered.
• Action: Set how to handle the detected packet.
Note: Filtering rules are matched one by one, if a provision is met
it will not continue to match against the other rules set.