Installation Guide

www.virtuusa.com
GD-4072
INSTALLATION INSTRUCTIONS
SKU:
Apply adhesive around the top edges of the cabinet Carefully place the top over the cabinet
Apply sealant around the top edge of
the sink rim. Flip top over and align
basin to cutout. Screw in threaded
bolts to each block. Secure plates with
washer then wing nuts.
Measure desired mirror
height and mark
Measure the distance
between the mirror’s hooks
and make a second mark.
Install screws into stud or use
drywall anchors.
Lift and hang mirror
Align and center
Basin InstallationMirror Installation
Top Installation
REV3.19.18