Installation Guide

Prior to installation, please check the items you

have received against the packing list. Report any

missing items to your local dealer immediately.

Protect all surfaces from sharp objects, high heat

sources, direct prolonged sunlight and chemical

hazards.

Professional installation is recommended.

www.virtuusa.com

GD-50060

PARTS LIST

TopBasinCabinet Mirror

(may differ depending on purchase)

INSTALLATION INSTRUCTIONS

SKU:

REV3.19.18

~77"

18~27"

PAGE 1
INSTALLATION INSTRUCTIONS www.virtuusa.com SKU: GD-50060 REV3.19.18 Prior to installation, please check the items you have received against the packing list. Report any missing items to your local dealer immediately. ~77" Protect all surfaces from sharp objects, high heat sources, direct prolonged sunlight and chemical hazards. 18~27" Professional installation is recommended.
PAGE 2
INSTALLATION INSTRUCTIONS www.virtuusa.com SKU: GD-50060 REV3.19.18 REQUIRED TOOLS DRAWER REMOVAL REMOVAL 1. Pull tabs toward center 2. Lift and pull drawer out Locate the slider tabs on the underside of the drawer. RE-INSTALL 1. Align drawer hole with slider stud 2.
PAGE 3
INSTALLATION INSTRUCTIONS www.virtuusa.com SKU: GD-50060 REV3.19.18 Mirror Installation Measure desired mirror height and mark Basin Installation Measure the distance between the mirror’s hooks and make a second mark. Install screws into stud or use drywall anchors. Lift and hang mirror Apply sealant around the top edge of the sink rim. Flip top over and align basin to cutout. Screw in threaded bolts to each block. Secure plates with washer then wing nuts.