GW1000M Series User Manual Issue: 2.
Table of Contents _______________________________________________________________________________________________________ 1 2 3 Introduction ............................................................................................... 10 1.1 Document scope ..................................................................................... 10 1.2 Using this documentation ......................................................................... 10 1.3 Safety ......................................
1: Introduction _______________________________________________________________________________________________________ 1 Introduction This user manual describes the features and how to configure Virtual Access GW1000M Series routers. Virtual Access GW1000M Series routers enable 3G or LTE connectivity in vehicles such as buses, taxis and fleet vehicles for applications such as passenger WiFi internet access, telemetry and employee WiFi access to corporate network services.
1: Introduction _______________________________________________________________________________________________________ Values for enabling and disabling a feature are varied throughout the web interface, for example, 1/0; Yes/No; True/False; check/uncheck a radio button. In the table descriptions, we use 0 to denote Disable and 1 to denote Enable. Some configuration sections can be defined more than once. An example of this is the routing table where multiple routes can exist and all are named ‘route’.
1: Introduction _______________________________________________________________________________________________________ 1.2.2 Definitions Throughout the document, we use the host name ‘VA_router’ to cover all router models. UCI commands and package option examples are shown in the following format: root@VA_router:~# vacmd show current config 1.2.3 Diagnostics Diagnostics are explained at the end of each feature’s chapter. 1.2.
1: Introduction _______________________________________________________________________________________________________ 1.4 Product disposal The United Kingdom and Republic of Ireland are under an obligation to minimise the disposal of Waste Electrical and Electronic Equipment (WEEE) in domestic waste and encourage recycling, recovery and environmentally-sound disposal.
1: Introduction _______________________________________________________________________________________________________ Date d’agrément : 10/02/2023 Approved by ANRT Morocco Approval Number: MR00036706ANRT2023 Approval Date: 10/10/2023 For more information, visit ANRT website: https://www.anrt.ma/en/ 1.5.3 USA: FCC Part 15 Regulations Operating requirements and conditions The design of the GW1042M-QFR complies with U.
1: Introduction _______________________________________________________________________________________________________ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
2: GW1000M Series router hardware _______________________________________________________________________________________________________ 2 GW1000M Series router hardware 2.1 GW1000M Series router hardware model features 2.1.1 GW1000M with standard locking DC power connector Figure 1: GW1000M Series router front GW1032M Figure 2: GW1000M Series router back Dual SIM sockets Dual antenna SMA connectors for 3G main and aux GPS antenna with 3.
2: GW1000M Series router hardware _______________________________________________________________________________________________________ GW1000M with isolated DC power connector Figure 3: GW1000M Series router front GW1032M Figure 4: GW1000M Series router back Dual antenna SMA connectors for 3G main and aux GPS antenna with 3.
2: GW1000M Series router hardware _______________________________________________________________________________________________________ 2.4 WiFi technology • 802.11 b/g/n • Single band 2.4GHz • Up to 20dBm output power • Internal antenna 2.5 Power supply The GW1000M Series router has four power supply options: • External standard 12V DC 0.5 A • External standard 12V DC 0.
2: GW1000M Series router hardware _______________________________________________________________________________________________________ 2.9 GW1000M Series components To enable and configure connections on your router, it must be correctly installed. The routers contain an internal web server that you use for configurations. Before you can access the internal web server and start the configuration, ensure the components are correctly connected and that your PC has the correct networking setup. 2.9.
2: GW1000M Series router hardware _______________________________________________________________________________________________________ 2.10 Inserting a SIM card 1. Ensure the unit is powered off. 2. Hold the SIM 1 card with the chip side facing down and the cut corner front left. 3. Gently push the SIM card into SIM slot 1 until it clicks in. 4. If using SIM 2 then hold the SIM with the cut corner front right 5. Gently push the SIM card into SIM slot 2 until it clicks in. 2.
2: GW1000M Series router hardware _______________________________________________________________________________________________________ 2.17 Reset button The reset button is used to request a system reset. When you press the reset button the PWR/CONFIG LED will display different patterns depending on how long you press the button. The flashing patterns will be different for the 2 flashing phases indicated below. The length of time you hold the reset button will determine the router behaviour.
3: GW1000M Series LED behaviour _______________________________________________________________________________________________________ 3 GW1000M Series LED behaviour 3.
3: GW1000M Series LED behaviour _______________________________________________________________________________________________________ Note: when a data connection does not exist, none of the signal LEDs will light regardless of signal strength. 3.2 GW1000M Series Ethernet port LED behaviour The Ethernet port has two physical LEDs, one is green and one is amber. When looking at the port the green LED is on the left and is the only active LED.
