User Manual

2: GW1000M Series router hardware
_______________________________________________________________________________________________________
2.9 GW1000M Series components
To enable and configure connections on your router, it must be correctly installed.
The routers contain an internal web server that you use for configurations. Before you
can access the internal web server and start the configuration, ensure the components
are correctly connected and that your PC has the correct networking setup.
2.9.1 Standard components
1 x GW1000M Series router
1 x plastic carrier
1 x lockable SIM cover
Table 2: GW1000M Series router standard components
2.9.2 Optional components
Ethernet cable. RJ45
connector at both ends.
Power supply unit.
Right angle antenna for
3G or 4G network.
Virtual Access supplies a wide range of antennas for
3G or 4G networks. Please visit our website:
www.virtualaccess.com or contact Virtual Access for
more information.
Right angle or straight
stubby antenna for WiFi
connection
Virtual Access supplies a wide range of antennas for WiFi. Please
visit our website:
www.virtualaccess.com or contact Virtual Access
for more information.
1 x fused automotive
cable
1 x non-fused automotive
cable
Table 3: GW1000M Series router optional components
_______________________________________________________________________________________________________
© Virtual Access 2023
GW1000M Series User Manual
Issue: 2.7 Page 19 of 23