User Manual
Table Of Contents
- 1 Introduction
- 1.1 Document scope
- 1.2 Using this documentation
- 1.3 Safety
- 1.4 Product disposal
- 1.5 Approvals and statements
- 2 GW1000M Series router hardware
- 2.1 GW1000M Series router hardware model features
- 2.2 GW1000M Series router dimensions
- 2.3 GSM technology
- 2.4 WiFi technology
- 2.5 Power supply
- 2.6 Compliance
- 2.7 Operating temperature range
- 2.8 Antenna
- 2.9 GW1000M Series components
- 2.10 Inserting a SIM card
- 2.11 Connecting the SIM lock
- 2.12 Connecting cables
- 2.13 Connecting the antenna
- 2.14 Installing the GW1000M
- 2.15 Installing the GW1000M on a wall
- 2.16 Powering up
- 2.17 Reset button
- Figure 2: GW1000M Series router back
- Figure 1: GW1000M Series router front
- Figure 4: GW1000M Series router back
- Figure 3: GW1000M Series router front
- 3 GW1000M Series LED behaviour
2: GW1000M Series router hardware
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2023
GW1000M Series User Manual
Issue: 2.7 Page 21 of 23
2.17 Reset button
The reset button is used to request a system reset.
When you press the reset button the PWR/CONFIG LED will display different patterns
depending on how long you press the button. The flashing patterns will be different for
the 2 flashing phases indicated below. The length of time you hold the reset button will
determine the router behaviour.
Press duration PWR/CONFIG LED
behaviour
Router behaviour on depress
0-3 seconds Solid on Normal reset to running config. No special
LED activity.
Between 3 and 15 seconds Flashing fast Releasing between 3-15 seconds switches
the router back to factory configuration.
Between 15 and 20 seconds Solid on Releasing between 15-20 seconds performs
a normal reset to running config.
Between 20 seconds and 30 seconds Flashing slowly Releasing between 20-30 seconds reboots
the router in recovery mode.
Over 30 seconds Solid on Releasing after 30 seconds performs a
normal reset.
Table 4: GW1000M Series router reset behaviour
2.17.1 Recovery mode
Recovery mode is a fail-safe mode where the router can load a default configuration
from the router’s firmware. If your router goes into recovery mode, all config files are
kept intact. After the next reboot, the router will revert to the previous config file.
You can use recovery mode to manipulate the config files but should only be used if all
other configs files are corrupt. If your router has entered recovery mode, contact your
local reseller for access information.