User Manual
Table Of Contents
- 1 Introduction
- 1.1 Document scope
- 1.2 Using this documentation
- 1.3 Safety
- 1.4 Product disposal
- 1.5 Approvals and statements
- 2 GW1000M Series router hardware
- 2.1 GW1000M Series router hardware model features
- 2.2 GW1000M Series router dimensions
- 2.3 GSM technology
- 2.4 WiFi technology
- 2.5 Power supply
- 2.6 Compliance
- 2.7 Operating temperature range
- 2.8 Antenna
- 2.9 GW1000M Series components
- 2.10 Inserting a SIM card
- 2.11 Connecting the SIM lock
- 2.12 Connecting cables
- 2.13 Connecting the antenna
- 2.14 Installing the GW1000M
- 2.15 Installing the GW1000M on a wall
- 2.16 Powering up
- 2.17 Reset button
- Figure 2: GW1000M Series router back
- Figure 1: GW1000M Series router front
- Figure 4: GW1000M Series router back
- Figure 3: GW1000M Series router front
- 3 GW1000M Series LED behaviour
3: GW1000M Series LED behaviour
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2023
GW1000M Series User Manual
Issue: 2.7 Page 23 of 23
Note: when a data connection does not exist, none of the signal LEDs will light
regardless of signal strength.
3.2 GW1000M Series Ethernet port LED behaviour
The Ethernet port has two physical LEDs, one is green and one is amber. When looking
at the port the green LED is on the left and is the only active LED.
Figure 6: Ethernet LED on the rear of the GW1000M Series router
Link LED
(green)
Off No physical Ethernet link detected
On Physical Ethernet link detected
Flashing Data is being transmitted/ received over the link
Table 6: The Ethernet LEDs activity descriptions