User Manual
Table Of Contents
- 1 Introduction
- 1.1 Document scope
- 1.2 Using this documentation
- 1.3 Safety
- 1.4 Product disposal
- 1.5 Approvals and statements
- 2 GW1000M Series router hardware
- 2.1 GW1000M Series router hardware model features
- 2.2 GW1000M Series router dimensions
- 2.3 GSM technology
- 2.4 WiFi technology
- 2.5 Power supply
- 2.6 Compliance
- 2.7 Operating temperature range
- 2.8 Antenna
- 2.9 GW1000M Series components
- 2.10 Inserting a SIM card
- 2.11 Connecting the SIM lock
- 2.12 Connecting cables
- 2.13 Connecting the antenna
- 2.14 Installing the GW1000M
- 2.15 Installing the GW1000M on a wall
- 2.16 Powering up
- 2.17 Reset button
- Figure 2: GW1000M Series router back
- Figure 1: GW1000M Series router front
- Figure 4: GW1000M Series router back
- Figure 3: GW1000M Series router front
- 3 GW1000M Series LED behaviour
1: Introduction
_______________________________________________________________________________________________________
1 Introduction
This user manual describes the features and how to configure Virtual Access GW1000M
Series routers.
Virtual Access GW1000M Series routers enable 3G or LTE connectivity in vehicles such as
buses, taxis and fleet vehicles for applications such as passenger WiFi internet access,
telemetry and employee WiFi access to corporate network services.
Designed for managed network providers, GW1000M Series routers provide secure WAN
connectivity for internet and private networking environments over 3G or 4G broadband
paths and incorporate optional 802.11n WiFi connectivity.
1.1 Document scope
This document covers models in the GW1000M Series.
The Virtual Access GW1000M Series router is a compact 3G, 4G/LTE router with WiFi,
designed with a rugged metal housing for use in vehicles and a wide range of site-based
applications.
GW1032M: Dual Ethernet, 3G, Dual SIM, Dual WiFi SMA female connectors
GW1042M: Dual Ethernet, 4G/LTE, Dual SIM, Dual WiFi SMA female connectors
1.2 Using this documentation
You can configure your router using either the router’s web interface or via the command
line using UCI commands. Each chapter explains first the web interface settings,
followed by how to configure the router using UCI. The web interface screens are shown
along with a path to the screen for example, ‘In the top menu, select Service ->
SNMP.’ followed by a screen grab.
After the screen grab there is an information table that describes each of the screen’s
fields.
1.2.1 Information tables
We use information tables to show the different ways to configure the router using the
router’s web and command line. The left-hand column shows three options:
• Web: refers the command on the router’s web page,
• UCI: shows the specific UCI command, and
• Opt: shows the package option.
The right-hand column shows a description field that describes the feature’s field or
command and shows any options for that feature.
Some features have a drop-down menu and the options are described in a table within
the description column. The default value is shown in a grey cell.
_______________________________________________________________________________________________________
© Virtual Access 2023
GW1000M Series User Manual
Issue: 2.7 Page 10 of 23