User Manual
Table Of Contents
- 1 Introduction
- 1.1 Document scope
- 1.2 Using this documentation
- 1.3 Safety
- 1.4 Product disposal
- 1.5 Approvals and statements
- 2 GW1000M Series router hardware
- 2.1 GW1000M Series router hardware model features
- 2.2 GW1000M Series router dimensions
- 2.3 GSM technology
- 2.4 WiFi technology
- 2.5 Power supply
- 2.6 Compliance
- 2.7 Operating temperature range
- 2.8 Antenna
- 2.9 GW1000M Series components
- 2.10 Inserting a SIM card
- 2.11 Connecting the SIM lock
- 2.12 Connecting cables
- 2.13 Connecting the antenna
- 2.14 Installing the GW1000M
- 2.15 Installing the GW1000M on a wall
- 2.16 Powering up
- 2.17 Reset button
- Figure 2: GW1000M Series router back
- Figure 1: GW1000M Series router front
- Figure 4: GW1000M Series router back
- Figure 3: GW1000M Series router front
- 3 GW1000M Series LED behaviour
1: Introduction
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2023
GW1000M Series User Manual
Issue: 2.7 Page 14 of 23
Date d’agrément : 10/02/2023
Approved by ANRT Morocco
Approval Number: MR00036706ANRT2023
Approval Date: 10/10/2023
For more information, visit ANRT website:
https://www.anrt.ma/en/
1.5.3 USA: FCC Part 15 Regulations
Operating requirements and conditions
The design of the GW1042M-QFR complies with U.S Federal Communications Commision
(FCC) guidelines respecting safety levels of radio frequency (RF) exposure for mobile or
fixed devices.
1.5.3.1 Caution statement for modifications
CAUTION
Any changes or modifications not expressly approved by Virtual Access (Ireland) Lts., could void the
user’s authority to operate the equipment.
1.5.3.2 FCC ID
The GW1042M-QFR has been approved for the following regulation:
FCCID: 2ACWY1042QFR
1.5.3.3 Labelling
A label showing the following FCCID number is affixed on the outside of the equipment:
FCCID: 2ACWY1042QFR
1.5.3.4 FCC Part 15 statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.