Users Manual Part 1

~ ~15~ ~8
In the first method, it should be con-
nected through the following steps:
1)C out-onnect wire end to theVGA VGA
put port at left side of ,and (or right side) AIO
connect another end to end of .VGA PC
2)Connect the end of wire to“USB TOUCH
USB” AIOend at left side of , connect flat end
of to the port(touch is available if USB USB
this end is connected) of external .PC
In the second method, it should be
connected through the following
steps:
1)Connect wire end to the HDMI HDMI
port at front side of and connect anotherAIO,
end to port of external .HDMI PC
2)Connect the flat port of wire to USB
, TOUCH-USB port at front of and connectAIO
another flat port to external port(touch USB
is available if this end is connected).
In the third method , it should be
connected through the following
steps:
1)Connect wire end to the down-HDMI
ward port at left side of , and HDMI AIO
connect another end to port of ex-HDMI
ternal PC.
VIII. Control Panel
(for illustrative purposes only and may differ from the actual product)
Left Control Panel
Right Control Panel
LCD Touch AIOLCD Touch AIO
2)Connect the square opening of USB
wire to the port at left side of “TOUCH-USB”
,and connect the flat side of port to AIO USB
the port of external (touch is availa-USB PC
ble if this end is connected)
Suggestion: HDMI interface at front panel
wire 3m; is connected to heHDMI T HDMI≤
interface at lateral side is connected to
wire 5m.HDMI ≤
After wiring is finished, you may switch
the screen of external to the screen of PC
for display and touch operation.Now,AIO
t whitebo-he user may write and mark using
ard software of external PC. For details
about installation and operation of whit-
eboard software,please refer to detailed
introduction to installation and operation of
whiteboard software in this Manual.
Note: For any inconsistency between the
real object and introduction in this Manual,
the real object shall prevail.
3.Starting program
Tap the application icon (for a infrared LCD integrated machine, tap the home icon
or the shortcut toolbar icon) to open the software, and the main toolbar appears on
the left side of the screen. Now annotating is available on the current Android
screen.
4.Basic operation
4.1 Switching status、
1) Desktop status and Annotate status
After opening the software,the default status is Annotate,which allows such opera-
tions as annotating and drawing.In the Annotate status,tap the first toolbar icon
to switch to the Desktop status.
The Desktop status allows to operate other applications on the desktop.Tap the float-
ing icon in the upper left corner to switch to Annotate status.
2) Collapsed status and Expanded status
In the Annotate status, the toolbar is expanded by default. Tap the second toolbar
icon to switch to Collapsed status. Now the toolbar remains in Annotate status
before it is collapsed.
When the toolbar is in Collapsed or Expanded status, long press icon to move
the toolbar.
4.2 Closing software、
Tap the last toolbar icon to close the software. Before it is closed the prompt
“Do you need to save the file?” pops up. Tap “Cancel” to quit exiting the whiteboard
software, tap “Yes” to save the annotations and exit the software, and tap “No” to
exit the software without saving the annotations.
4.2 Main features、
4.2.1 Annotation features、
Tap the annotation pen icon on the toolbar to quickly select a pen status for an-
notation; tap the pen setting icon to set the annotation pen. The pen setting fea-
tures are as follows:
: Annotation pen, which, despite attributes that are
set, once tapped becomes a red pen with font size5,
solid line, and curve.
: Eraser, which is divided into large, medium and
small sizes, and can be used to erase annotations,
graphics, and texts.
: Solid line,which once switched from dashed line
can be used for annotating or drawing.
: Dashed line,which once switched from solid line
can be used for annotating or drawing.