Users Manual Part 1

III. Notice for Users
FCC Warning
This mark reminds users to correctly use this
Product in accordance with the User ’s Manual
to keep safety.
1.Recommended distance for comfort viewing
The best distance for viewing shall be 5-7 times of that of screen height.
2.Height & angle
Appropriate viewing height and angle can help get you rid of an easy fatigue.
3.Volume
Please keep proper volume to keep out interference to others(at night,in particular).
4.Ambient brightness
Your eyes may suffer from an easy fatigue in case of direct sunlight to screen,ex-
cessive brightness or darkness of room, intense darkness without light around, or
fluorescent screen has reflected light. So, please keep soft and indirect lighting,
instead of direct sunlight on screen. The brightness sufficient for reading newspa-
per shall be the best.
5.Adequate rest
It is highly recommended that you take a periodic rest, even if this Product has
neither blink nor harm from radiation by using LED technique.
~ ~20 ~ ~3
LCD Touch AIOLCD Touch AIO
XII. Installation of Electric Whiteboard in Computer System
Note:if the interface above is not popped up automatically,please click the autorun .
.hta application program in CD to pop up it
1 Introduction to installation of electric whiteboard software CD.
:WhiteBoard electric whiteboard software includes 2 CD
( : Electric whiteboard software Junior version) applicable to kindergarten and
junior schools;
Electric whiteboard :software general version) applicable to junior high school( ,
senior high , , school vocational school colleges and universities and other industries .
. 2 Key notices in installation
Note:if software is blocked by antivirus software or firewall during installation,
, please select Allow all operations of program” and tick Remember my choice” ”
no more prompt”;otherwise,it may lead to installation failure or software installa-
tion cannot be normally used.
. 3 Installation interface of electric whiteboard
Put electric whiteboard CD in the drive of computer and it will have auto run
and pop up the interface below:
XIII. Drive Installation
.No drive is needed to be installed for this LCD AIO
XIV. AIO Positioning
Once the electric whiteboard software is installed it will generate Device , "
" : < positioning icon on desk and double click to open it as shown in the right
>.figure