Users Manual Part 1

~ ~19~ ~4
RSK ELSCTRIC SHOCK
6 Operation of remote controller.
Never cover receiving window of remote controller or expose it to strong sunlight
to keep good receiving sensitivity.
7. Notices for dry cells of remote controller
The service life of dry cells is around 1 year (depending on your frequency of use).
In case remote controller is faced with short operation distance and low flexibility,
please replace both old cells of it.
mixed use of new and old cells, or dry cells of different types is not allowed; Note:
otherwise, the remote controller can be damaged by liquid leakage.Please take out
dry cells of a remote controller to be long idled. In case liquid leakage occurred,
please firstly clean up the liquid in cell box before installing the new cells.
8. Way of handling
Please firstly uplift this Product before handling.
Make sure this Product is handled by at least two persons to keep its stability
and protect shell.
Do not scratch the screen during the handling.
9. Condensation
If this Product is moved from cold to warm place quickly, or from room with elec-
tric heater to other places, this Product may have puzzled interface, failed color
display at certain images,or uneven color,all of which are caused by condensation
in machine. The image can be recovered after volatilization of steam.
IV. Safety Notice - Warning
4.1 Immediately shut off the power supply
and unplug the socket in case of any smoke,
and consult the dealer at once . Fire hazard
or electric shock may occur if continuing
using it.
4.2 If screen has no output of image or audio,
please immediately power off this Product
and unplug the power socket. If such fault
occurs suddenly at normal state, please do
not keep using this Product,but consult the
dealer.
4.3 If this Product falls onto ground acciden-
tally or shell is damaged,please immediately
power off this Product and unplug the power
socket.Please do not keep using this Product,
but consult the dealer, to keep out fire hazard
or electric shock.
4.4 Never plug in/out the power socket by
wet hands to keep out electric shock.
4.5 Keep power socket free from accumulated
dust to avoid degrading insulation performance
of plug. Please regularly clean the dust to keep
out a fire hazard.
4.6 Do not maintain,transform or disassemble
this Product without permission;otherwise,
electric shock,fire hazard or damage of internal
parts may occur since this Product contains
high-voltage and .For details fragile articles
of maintenance, Letter of please refer to the
Guarantee and consult the dealer.
LCD Touch AIOLCD Touch AIO
Please use the Whiteboard pen to vertically tap the center of the positioning cursor.
Now the green light circle grades into orange. When the entire circle turns orange,
the positioning of the point is finished,and the positioning cursor will automatically
move to the next point, as shown below.
Repeat the above action until all points are positioned.
7.2.Shortcuts setting (This series products not hot key)
On the Android OS, not all the shortcuts on the left and right sides of the integrated
machine are enabled. The shortcuts that are enabled are:1 Switch mode, 2 Collapse
toolbar, 3 New page, 4 Page up, 5 Page down, 6 Blue pen, 7 Red pen, 8 Black pen,
9 Highlighter, 10 Smart pen, 11 Eraser, 12 Undo, 13 Clear screen, 14 Text pen,
16 Open file
1) Disable shortcuts
The default status of shortcuts is enabled. After Disable shortcuts is checked, the
shortcuts function on the Android OS is not available. After it is unchecked, the
shortcuts function is restored. (This series products default option "Cancel HotKey")
(Shortcuts are disabled if checked)
2) Flip Whiteboard
If the function of Whiteboard flipping is enabled by service program on the Windows
OS, shortcuts will be disabled on the Android OS, meaning it is also required to check
Flip whiteboard on the Android OS .
8.About
It displays software version and copyright information.