Users Manual Part 1

~ ~18 ~5~
4.7 Keep this roduct free from long contact P
with rubber to protect this Product against
shell metamorphism or coating peeling.
4.8 This Product is applicable to 220VAC
power socket only. Never use this Product
out of rated voltage (220VAC); otherwise,
fire hazard or electric shock may occur.
4.9 In case of thunder or lightning, please
do not touch antenna or power wire , but
immediately unplug the power socket,so as
to keep out electric shock.
4.10 Never place this roduct in places with P
high temperature or direct sunlight to keep
out abnormal temperature rise and fire hazard.
4.11 It is strongly recommended that you
share wall-mounted plug to extension wire
and other power consumption goods and, if
it is inevitable,please check if its rated vol-
tage is sufficient;otherwise,a fire hazard may
occur if extension wire has excessive load.
4.12 Never place vase,flowerpot,glassware,
cosmetic,chemical containers,liquid or small
metal object on this Product to keep out fire
hazard or electric shock if liquid or small
object falls into it, and if it occurs, please
immediately power off this Product and
unplug the power socket, and consult the
dealer.
4.13Please well protect this Product against
foreign matters to prevent fire hazard or
electric shock. However, if foreign matters
are found in it,please immediately power off
this Product and unplug the power socket,
and consult the dealer. Much attention shall
be attached to preventing children from
putting foreign matters in this Product.
4.14 Never expose this Product to oil,smoke
and vapor, or near heater or dusty place to
avoid degrading the image quality,fire hazard
or electric shock.
V. Safety Notice - Caution
5.1 Never block the ventilation hole of this
Product, put screen face upwards, laterally
or invert it.Never put this Product in poorly
ventilated place,such as closet or bookshelf.
The distance between machine and wall
should be over cm. ever put this Product 15 N
on carpet or flammable staffs, or cover it
using curtain or tablecloth to keep out a fire
hazard.
5.2 This Product shall be installed in stable
place with good ventilation.
5.3 Never put heavy objects on this Product
to prevent unstable center of gravity,inver-
ting this Product or hazards by falling of
heavy objects.
LCD Touch AIOLCD Touch AIO
5.Settings and about
5.1 Main toolbar settings、
The user can customize the main toolbar icons by tapping Settings -Main Toolbar
Icon Settings to open the main toolbar icon settings window, as shown below:
The upper part of the window (boxed rectangle) indicates the icons currently displayed
on the main toolbar, and the lower part (boxed oval) indicates the icons that can be
added to the main toolbar.
Removing a main toolbar icon:Tap the icon displayed on the main toolbar to remove
it. Tap the “Finish” button after setting.
Add a main toolbar icon: Tap the icon to be added in the lower part, and the icon
will be selected and its function will be displayed at the bottom of the window. Tap
again while it is selected and it will be moved to the main toolbar display area.Tap the
“Finish”button after setting.After icon adding or removing,tap the“Restore Defaults”
t button to restore the main toolbar to its default state.Alternatively,long press the firs
icon on the main toolbar, and tap OK in the pop-up Restore Defaults dialog box.
6.Open Eshare receiver
After the Eshare receiver is installed on the Android OS of AIO, youcan quickly open
Eshare application with the button .
If the Eshare software is not installed, the following prompt appears:
7.Positioning and shortcuts positioning
7.1 Positioning
For touch position correction on the Android OS, tap Settings - Positioning
to offer options of 4-point positioning,5-point positioning,9-point
positioning and 16 points positioning. After one of the positioning
option is selected,it will jump to the positioning screen,as shown below.