User`s manual

Congratulations on purchasing the GSi BURN, a high quality musical instrument entirely designed and built in
Italy. This instrument is the result of years of research and careful study of the effect produced by the famous Leslie
rotary speakers. We are confident that the BURN will become an important element of your set-up, bringing big
improvements to your sound. We recommend that you read this manual in order to take advantage of all the features
that the BURN offers, and store it for future reference.
The GSi Team.
SAFETY INFORMATION
– Do not open the instrument. The instrument can be opened and repaired only by qualified personnel.
Unauthorized opening voids the warranty.
– The supplied power adapter can be used in any country that has a mains voltage between 100 Vac and 240 Vac.
Use only the original power supply.
– Do not expose the instrument to rain and moisture.
– Do not expose the instrument to direct sunlight.
– Do not touch the AC adapter with wet hands.
– Be careful not to infiltrate powders and liquids inside the instrument.
– If liquids get inside the unit remove the power immediately and contact a service center.
– The side ventilation holes must not be obstructed.
– Do not clean using abrasive cleaners as they may damage the surface.
– Please keep all packaging in case you need to transport the instrument to a service center.
WARRANTY
– GSi BURN is subject to 12 months manufacturer's warranty.
– Warranty extensions are at the discretion of the retailer.
– Damages caused by misuse, improper maintenance or transportation are not covered by this warranty.
– During the warranty period, the customer is entitled to repair or replacement of any parts considered defective at
no charge.
– The possible replacement of the entire product is at the manufacturer's discretion.
CHAPTER INDEX
1. INTRODUCTION
Pag.
3
2. CONTROL PANEL
Pag.
3
3. CONNECTION PANEL
Pag.
4
4. EXAMPLES OF CONNECTION
Pag.
5
5. HOME SCREEN
Pag.
6
6. LOCK FUNCTION
Pag.
6
7. EXTERNAL MODE
Pag.
6
8. EDIT MDOE
Pag.
6
9. PRESET PARAMETERS
Pag.
7
10. RENAME, SAVE OR INITIALIZE A PRESET
Pag.
10
11. INPUT/OUTPUT FUNCTIONS
Pag.
10
12. MIDI SETTINGS
Pag.
11
13. ASSIGNING MIDI CONTINUOUS CONTROLLERS
Pag.
12
14. MAPPING MIDI PROGRAM CHANGE VS. PRESET
Pag.
12
15. PEDAL SETTINGS
Pag.
13
16. DISPLAY CONTRAST AND FIRMWARE INFORMATION
Pag.
14
17. REMOTE CONTROL
Pag.
14
18. UTILITY
Pag.
15
19. OTHER MIDI FUNCTIONS
Pag.
15
20. TECHNICAL SPECIFICATIONS
Pag.
16
GSi BURN USER'S MANUAL - Pag. 2/16