MB-2 User Manual Introduction & foreword Congratulation on your MB-2! ViseeO MB-2 is the latest and one of the most advanced Bluetooth handsfree system ever designed for your Mercedes Benz. You will be able to connect the latest mobile phone to the handsfree system, sync phonebook and answer or end a call from the vehicle’s original steering wheel control or navigation keypads. Simply plug the MB-2 into the car’s UHI connector to instantly enjoy a wireless and peace of mind communication on the road.
MB-2 User Manual Table of Content 1. Getting Started..................................................................................................................................................4 2. Understanding Your MB-2 .............................................................................................................................5 3. Inserting MB-2 into UHI/MHI Connector...................................................................................................6 4. Pairing......
MB-2 User Manual 13. Special Note on Car Compatibility.........................................................................................................19 14. Special Note on W204 Vehicle (C-Class 2007+) ................................................................................19 14.1 Software Switch .............................................................................................................................19 14.2 Phonebook Organization on W204 vehicle ........................
MB-2 User Manual 1. Getting Started This manual instruction will assist you: • Getting to know your MB-2 Understanding MB-2’s keypads, LED indicators, switch, and various ports. • Inserting MB-2 into UHI/MHI connector Placing your MB-2 in the right place. • Pair your mobile phone with MB-2 Creating and storing link between your phone and MB-2 to allow communication between the two devices and to enable auto connection everytime you return to your car.
MB-2 User Manual 2.
MB-2 User Manual 3. Inserting MB-2 into UHI/MHI Connector MB-2 is designed to work with pre-installed UHI/MHI system in your car. Therefore, you will need to locate the UHI/MHI connector which can normally be found in the tray under the front armrest. If there is a phone cradle attached to the UHI/MHI connector please removes it before connecting your MB-2 to the UHI/MHI connector. To remove the cradle: 1. Make sure your engine is off. 2.
MB-2 User Manual 3. Turn on the engine. MB-2’s LED lights should flash in top to bottom order to indicate connection successful. Note on W204 model: For W204 vehicle you will need to choose the right software setting before inserting MB-2 into UHI/MHI connector. Please refer to the “Special Note on W204 Vehicle” section in this manual for further information.
MB-2 User Manual 4. Pairing Once you install your MB-2 in your car, you need to pair it with your mobile phone. To pair: d 1. Press and hold the Pairing button until you see the white LED indicator flashes. This indicates MB-2 is in Pairing Mode ready for pairing. c 2. Turn on the Bluetooth on your mobile phone and search for audio device to pair. Note: The search time varies on different phones which can take a while before it ends. 3.
MB-2 User Manual steps to connect your phone with MB-2. For instance, you will be asked to allow auto connection in Nokia before you can get connection established. Please select “yes” if you see this message. For other phones you might need to select “connect” after the phone is paired. 5. Once paired and connected MB-2’s Bluetooth Logo will light up and VISEEO device name will appear on the car display to indicate connection is on.
MB-2 User Manual 5. Automatic Phonebook Sync MB-2 supports phonebook sync function and in most cases this will be done automatically. As soon as you connect your phone the green LED light will flash for a while. When you see the green solid light appears the phonebooks are stored in the MB-2 memory and ready for transfer. To transfer the phonebook to your car display system: 1. Press the Sync button on your MB-2 when you see the solid green light. 2.
MB-2 User Manual refer to the “Special Note on W204 Vehicle” section in this manual for further information. 6. Manually Upload Phonebook MB-2 supports user to upload phonebook manually from the connected mobile phone, other phones and from computer under the object push profile (OPP) mode. To activate OPP mode: 1. Make sure MB-2 is powered up and connected to your phone already. 2. Press and hold the OPP button until you see the blue LED light (OPP indicator) flashes.
MB-2 User Manual Note: Send function may vary from phone to phone. Please refer to you phone manual or contact your phone manufacturer for further details. Note: Some phones support multiple selections of contacts to be sent as business cards in one go. Please select up to only 100 contacts to send each time. Note: To send contacts via computer please download the instruction from http://www.viseeo.com/ 4.
MB-2 User Manual 7. Pairing Multiple Phones You are only required to pair your phone with MB-2 once. It stores the link with your phone to allow automatic reconnection in the future. If you want to pair with another phone with MB-2 please repeat the pairing procedure and phonebook sync process as described in Chapter 4, 5 and 6 respectively.
MB-2 User Manual and viewable in the system regardless which phone is connected to MB-2. For further information on W204 vehicle please refer to “Special Note on W204 Vehicle” in the later chapter. 8. Voice Dialing Activation MB-2 supports voice dialing function that is available on your phone. To activate voice dialing on your phone: 1. Press the OPP/Voice Dialing Activation button. 2. When you hear the voice dialing sound please speak the name you wish to dial out from your phone.
MB-2 User Manual 9. Private Call Mode MB-2 supports switch between handsfree mode and private call mode, which allows you to revert to using your phone during a call. c To activate this function: 1. Press the Pairing button during the call 2. Now the conversation is transferred back to your mobile phone To switch back to handsfree mode: 1. Press the Pairing button again during the call. 2. Now the conversation is transferred back to MB-2.
MB-2 User Manual 10. Microphone Volume Setting The microphone volume dial at right-side of MB-2 is designed for accommodating the variations in microphone designs found in older Mercedes Benz (mainly produced before 2005). Majority of Mercedes Benz vehicles produced after 2005 come with multiple microphones hardware that requires the dial to be turned upwards to the maximum setting for the best result.
MB-2 User Manual 11. Power Reset If you are unable to get automatic reconnection or are experiencing some problem with MB-2, you can force the unit to reset its power for regaining the connection. To reset power: 1. Press the Power Reset button (4th button). Once the power is reset MB-2 should have all the LED lights flashing for few seconds before reconnecting with your mobile phone (i.e. Bluetooth logo light up and the car screen display “VISEEO” device name).
MB-2 User Manual 12. Clearing All Pairing Settings (Master Reset) If you are still experiencing pairing or connection difficulty with MB-2 after power reset, you can clear all the pairing setting stored on MB-2 and then pair the phone again. To clear the pairing it is advised to clear the pairing setting in your phone first: 1. 2. 3. Turn off Bluetooth on your mobile phone. Delete the device name “ViseeO” stored in your phone. Turn on the Bluetooth on your mobile phone.
MB-2 User Manual 13. Special Note on Car Compatibility In order to use MB-2 you must ensure you car is equipped with UHI/MHI (US version of UHI) connector. This connector is usually located in the tray under the front armrest. W204 type of vehicles also comes with UHI/MHI but the system works in a different logic therefore, require special attention. You can find out further information in the later chapter “Special Note on W204 Vehicle” of this manual.
MB-2 User Manual 2. Switch both software switches (1&2) to the off position (see picture on the right) Now you are ready to insert MB-2 into the UHI connector of W204 vehicle. Please follow the same pairing procedures described in Chapter 4. 14.2 Phonebook Organization on W204 vehicle Phonebook management on the W204 works in a different way to the other Mercedes Benz cars.
MB-2 User Manual This is also the same for uploading the phonebook under the OPP mode. If you transfer the phonebook entries to MB-2 under the OPP mode you will also require to select “Telephone” then, follow by “Import External Data” command on the W204 system display after you have completed the manual phonebook upload under OPP mode and pressed power reset to regain connection.
MB-2 User Manual 15. Software Upgrade The software and Bluetooth firmware on MB-2 are upgradeable using the special USB upgrade cable set provided with the kit. Please see separate instruction on how to upgrade your MB-2 or visit http://www.viseeo.com/ for the latest information on update. 16. Notes on Road Safety We strongly advise that full attention is to be paid to the traffic conditions whenever the vehicle is moving. Distraction of attention can lead to dangerous traffic situation.
