Datasheet

ManualsBrandsVishay ManualsAxial Tantalum Electrolytic CapacitorsTantal capacitor, 1uF, 35V, 20%

Document Number: 40015

Revision 13-Jun-02

www.vishay.com

150D

Vishay Sprague

For technical questions, contact tantalum@vishay.com

DIMENSIONS in inches [millimeters]

LEAD SIZEWITH INSULATING SLEEVE*

CASE

CODE

AWG

NO.

NOMINAL

DIAMETER

0.020

[0.51]

0.020

[0.51]

0.025

[0.64]

0.025

[0.64]

*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.

0.286 ± 0.031

[7.26 ± 0.79]

0.474 ± 0.031

[12.04 ± 0.79]

0.686 ± 0.031

[17.42 ± 0.79]

0.786 ± 0.031

[19.96 ± 0.79]

0.135 ± 0.016

[3.43 ± 0.41]

0.185 ± 0.016

[4.70 ± 0.41]

0.289 ± 0.016

[7.34 ± 0.41]

0.351 ± 0.016

[8.92 ± 0.41]

J (MAXIMUM)

0.422

[10.720]

0.610

[15.490]

0.822

[20.880]

0.922

[23.420]

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55°C to + 85°C. (To + 125°C

with voltage derating.)

Capacitance Tolerance: At 120 Hz, + 25°C. ± 20%,

± 10% standard. ± 5% available as special.

Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor, as

determined from the expression 2πfRC, shall not exceed the

values listed in the Standard Ratings Tables.

DC Leakage Current (DCL Max.):

At + 25

°C: Leakage current shall not exceed the values listed

in he Standard Ratings Tables.

0.047 [1.19] MAX.

0.125 [3.18] MAX.

SOLID TINNED

NICKEL LEADS

1.500 ± 0.250

[38.10 ± 6.35]

MAX.

1.500 ± 0.250

[38.10 ± 6.35]

DIA.

Solid-Electrolyte TANTALEX

Capacitors

Hermetically-Sealed, Axial-Lead

FEATURES

• These high performance, hermetically-sealed TANTALEX

capacitors have set the standard for solid-electrolyte

tantalum capacitors for more than three decades.

• High capacitance, low DCL, low dissipation factor and

exceptional operating stability.

• Performance and reliability have been proven in

commercial, industrial and military applications.

• Available in four case codes and capacitors and are

supplied with plastic-film insulation.

• Terminals are solid, tinned nickel wire leads.

• The Military equivalent to the 150D is the CSR13 which is

qualified to MIL-C-39003/01.

At + 85

°C: Leakage current shall not exceed 10 times the

values listed in the Standard Ratings Tables.

At +125

°C: Leakage shall not exceed 15 times the values

listed in the Standard Ratings Tables.

Life Test: Capacitors shall withstand rated DC

voltage applied at + 85°C for 2000 hours or derated DC

voltage applied at + 125°C for 1000 hours.

Following the life test:

1. DCL shall not exceed 125% of the initial requirement.

2. Dissipation Factor shall meet the initial requirement.

3. Change in capacitance shall not exceed ± 5%.

Summary of content (10 pages)

PAGE 1
50D Vishay Sprague Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead FEATURES • These high performance, hermetically-sealed TANTALEX® capacitors have set the standard for solid-electrolyte tantalum capacitors for more than three decades. • High capacitance, low DCL, low dissipation factor and exceptional operating stability. • Performance and reliability have been proven in commercial, industrial and military applications.
PAGE 2
150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague ORDERING INFORMATION 150D MODEL 224 CAPACITANCE X0 CAPACITANCE TOLERANCE 006 DC VOLTAGE RATING AT + 85°C A CASE CODE 2 STYLE NUMBER T PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20% X9 = ± 10% *X5 = ± 5% *Special order This is expressed in volts.
PAGE 3
150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µF) MAX. DF @ + 25°C 120 Hz (%) 10 WVDC @ + 85°C, SURGE = 13 V . . . 7 WVDC @ + 125°C, SURGE = 9 V 0.22 A 0.27 A 0.33 A 0.39 A 0.47 A 0.56 A 0.68 A 0.82 A 1.0 A 1.2 A 1.5 A 1.8 A 2.2 A 2.7 A 3.3 A 3.9 A 4.7 A 5.6 B 6.8 B 8.2 B 10.0 B 12.0 B 15.
PAGE 4
150D TANTALEX® Solid-Electrolyte Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 15 WVDC @ + 85°C, SURGE = 20 V . . . 10 WVDC @ + 125°C, SURGE = 12 V 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.
PAGE 5
150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 20 WVDC @ + 85°C, SURGE = 26 V . . . 13 WVDC @ + 125°C, SURGE = 16 V 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.
PAGE 6
150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 35 WVDC @ + 85°C, SURGE = 46 V . . . 23 WVDC @ + 125°C, SURGE = 28 V 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.
PAGE 7
150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 50 WVDC @ + 85°C, SURGE = 65 V . . . 33 WVDC @ + 125°C, SURGE = 40 V 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.
PAGE 8
150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ±20% PART NUMBER* CAP. TOL ±10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 0.5 0.5 1.0 1.0 1.0 1.0 2.0 2.0 4.0 4.0 6.0 6.0 8.0 10.0 12.0 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 75 WVDC @ + 85°C, SURGE = 98 V . . . 50 WVDC @ + 125°C, SURGE = 64 V 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.
PAGE 9
150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120Hz (%) 100 WVDC @ + 85°C, SURGE = 130 V . . . 67 WVDC @ + 125°C, SURGE = 86 V 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.
PAGE 10
150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD REEL PACKAGING SPECIFICATIONS - MEETS EIA STANDARD RS-296 in inches [millimeters] "A" 13.0 [330.2] STANDARD REEL Tape Spacing B COMPONENT SPACING 1.126 to 3.07 [28.6 to 78.0] I.D. REEL HUB A 1.374 to 3.626 [34.9 to 92.1] 0.031 [0.79] MAX. OFF CENTER (1.a) 0.625 ± 0.062 DIA. [15.88 ± 1.575] THRU HOLE 0.125 [3.18] MAX. 0.250 [6.35] (3.b) 0.750 [19.05] "A" LABEL (4.a) 0.031 [0.79] (3.