Datasheet

System 6000
Vishay Micro-Measurements
StrainSmart
®
Data Acquisition System
www.vishaymg.com [e-mail] Document Number: 11270
42 Revision: 14-Nov-06
AC Accuracy: (typical):
Input Frequency/Bandwidth: 500/3000 50/200
Spurious Free Dynamic Range: 100dB 110dB
Signal to Noise: 90dB 95dB
Signal to Distortion: 100dB 110dB
MEASUREMENT RANGE: ±81.9mV
RESOLUTION: 2.5μV
A/D CONVERTER :
Type:
16-bit successive approximation with integrated sample
and hold.
Integral Linearity Error:
±2 LSB
FILTERS:
Linear phase, analog, 6-pole anti-aliasing filter, and 256-tap,
programmable, FIR digital filter (lowpass)
Passband Frequency:
User-selectable 1Hz to 4kHz
MODEL 6030A HIGH-LEVEL INPUT CARD
• Complete high-level signal conditioner with 16-bit
analog-to-digital converter
• Programmable gain
• Programmable digital filter
• Programmable excitation supply. The supply is settable to
0, 0.5, 1, 2, 5, 10, 15, 20, 24, and 30V. Up to 50mA of
current is available on each channel.
• Fixed low-pass anti-aliasing filter (six-pole)
• Input connections to user's voltage source via nine-pin
D-sub connector
• Analog output
CHANNELS: One per card.
INPUTS: DC volts (differential)
Input Impedance: 22MΩ each input.
Source Current: ±2nA typical; ±100nA ma
x
INPUT CONNECTOR: Nine-pin D-sub style
AMPLIFIER:
Zero Temperature Stability:
±2μV/°C RTI, typical. ±100μV/°C RTO, after 30-minute
warm-up.
DC Gain Accuracy & Stability:
±0.05% at 23°C ± 20ppm/°C
Common-Mode Rejection (dc to 60Hz):
86dB typical at X1 gain
94dB typical at X10 gain
Common-Mode Voltage:
±12V typical
AC Accuracy: (typical):
Input Frequency/Bandwidth: 500/3000 50/200
Spurious Free Dynamic Range: 100dB 110dB
Signal to Noise: 90dB 95dB
Signal to Distortion: 100dB 110dB
MEASUREMENT RANGES: ±1, ±2, ±5, ±10Vdc
RESOLUTION: 30.5, 61, 152.5, 305μV
EXCITATION:
0, 0.5, 1.0, 2.0, 5.0, 10.0, 15.0, 20.0, 24.0, 30.0Vdc
Accuracy:
±10mV typical at 0 to 24Vdc; ±5% at 30Vdc
Current:
50mA max. Over-current protected
Over-current protected.
Load Regulation:
<±0.05% of full scale for a load variation of 10% to 100%
of full load
Temperature Stability:
Better than ±0.005%/°C
A/D CONVERTER :
Type:
16-bit successive approximation with integrated sample
and hold.
Integral Linearity Error:
±2 LSB
FILTERS:
Linear phase, analog, 6-pole anti-aliasing filter, and 256-tap,
programmable, FIR digital filter (lowpass)
Passband Frequency:
User-selectable 1Hz to 4kHz
ANALOG OUTPUT: (6030A version only)
Type:
±5.00V max for typical full-scale input of ±32767με
Output Load:
2000Ω min
Bandwidth:
DC to 15kHz (-0.5dB typical)