Datasheet

ManualsBrandsVishay ManualsCapacitorsTantalum Capacitor, 10uF, 25V, 20%

293D

www.vishay.com

Vishay Sprague

Revision: 05-Jun-2018

Document Number: 40002

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Solid Tantalum Surface Mount Chip Capacitors

ANTAMOUNT™, Molded Case, Standard Industrial Grade

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

www.vishay.com/doc?40192

Operating Temperature: -55 °C to +125 °C

(above 85 °C, voltage derating is required)

Capacitance Range: 0.10 μF to 1000 μF

Capacitance Tolerance: ± 5 %, ± 10 % , ± 20 %

100 % Surge Current Tested (D and E Case Codes)

Voltage Rating: 4 V

to 75 V

FEATURES

• Molded case available in six case codes

• Terminations: 100 % matte tin standard,

tin / lead available

• Compatible with “high volume” automatic

pick and place equipment

• Meets EIA-535-BAAC mechanical and

performance requirements

• Qualified to EIA-717

• Moisture sensitivity level 1

• Optical character recognition qualified

• Compliant terminations

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details

APPLICATIONS

• Industrial

• Telecom infrastructure

• General purpose

Notes

• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. 

Voltage substitutions will be marked with the higher voltage rating

• We reserve the right to supply better series with more extensive screening

• Dry pack as specified in J-STD-033 for MSL3. Applicable for D, E, and V cases only

Available

ORDERING INFORMATION

293D 107 X9 010 D 2WE3

TYPE CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE RATING

AT +85 °C

CASE CODE TERMINATION AND

PACKAGING

This is expressed in

picofarads. The first

two digits are the

significant figures.

The third is the number

of zeros to follow.

X0 = ± 20 %

X9 = ± 10 %

X5 = ± 5 %

(special order)

This is expressed in V.

To complete the three-digit

block, zeros precede the

voltage rating. A decimal

point is indicated by an “R”

(6R3 = 6.3 V).

See Ratings

and Case

Codes table

Matte tin

2TE3 = 7" (178 mm) reel

2WE3 = 13" (330 mm) reel

2DE3 = 7" (178 mm) reel,

dry pack

2RE3 = 13" (330 mm) reel,

dry pack

Tin / lead

8T = 7" (178 mm) reel

8W = 13" (330 mm) reel

8D = 7" (178 mm) reel,

dry pack

8R = 13" (330 mm) reel,

dry pack

Summary of content (24 pages)

PAGE 1
293D www.vishay.
PAGE 2
93D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L W TW H Glue Pad TH (MIN.) P Glue Pad CASE CODE EIA SIZE L W H P TW TH (MIN.) A 3216-18 0.126 ± 0.008 [3.2 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.047 ± 0.004 [1.2 ± 0.10] 0.028 [0.70] B 3528-21 0.138 ± 0.008 [3.5 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.075 ± 0.008 [1.9 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.028 [0.
PAGE 3
293D www.vishay.com Vishay Sprague MARKING “A” CASE VOLTAGE CODE VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T 75 S Indicates lead (Pb)-free Capacitance code, pF Date code designation V 104L Voltage code Polarity band (+) A Case Indicates lead (Pb)-free Voltage Capacitance, μF Polarity band (+) 22 10L XX 2 Vishay marking Date code B, C, D, E, V Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating.
PAGE 4
293D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) CAPACITANCE (μF) CASE CODE PART NUMBER 22 A 293D226(1)004A(2) 0.9 6 2.90 0.16 22 B 293D226(1)004B(2) 0.9 6 2.50 0.18 22 C 293D226(1)004C(2) 0.9 6 1.80 0.25 33 A 293D336(1)004A(2) 1.3 6 2.90 0.16 33 B 293D336(1)004B(2) 1.3 6 2.00 0.21 33 C 293D336(1)004C(2) 1.3 6 1.80 0.
PAGE 5
293D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER 10 A 293D106(1)6R3A(2) MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 3.40 0.15 6.3 VDC AT +85 °C; 4 VDC AT +125 °C 0.6 10 B 293D106(1)6R3B(2) 0.6 6 2.90 0.17 10 C 293D106(1)6R3C(2) 0.6 6 3.00 0.19 15 A 293D156(1)6R3A(2) 0.9 6 2.90 0.16 15 B 293D156(1)6R3B(2) 0.9 6 2.50 0.18 15 C 293D156(1)6R3C(2) 0.
PAGE 6
293D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 0.47 1.0 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 15 22 22 22 22 33 33 33 47 47 47 68 68 68 68 68 100 100 100 100 100 120 150 150 150 220 220 220 330 330 470 A A A A B A B A B C A B C A B C A B C A B C D B C D B C D B C D E V (1) B C D E V (1) E C D E D E V (1) D E E PART NUMBER MAX. DCL AT +25 °C (μA) 10 VDC AT +85 °C; 7 VDC AT +125 °C 293D474(1)010A(2) 0.5 293D105(1)010A(2) 0.5 293D155(1)010A(2) 0.
PAGE 7
293D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 0.5 4 10.40 0.08 293D105(1)016A(2) 0.5 4 9.30 0.09 293D155(1)016A(2) 0.5 6 6.70 0.11 B 293D155(1)016B(2) 0.5 6 6.40 0.12 A 293D225(1)016A(2) 0.5 6 5.90 0.11 2.2 B 293D225(1)016B(2) 0.5 6 4.60 0.14 3.3 A 293D335(1)016A(2) 0.5 6 5.00 0.12 3.3 B 293D335(1)016B(2) 0.5 6 3.50 0.
PAGE 8
293D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 0.5 4 14.00 0.07 293D684(1)020A(2) 0.5 4 10.00 0.09 A 293D105(1)020A(2) 0.5 4 8.40 0.09 B 293D105(1)020B(2) 0.5 4 9.00 0.10 CAPACITANCE (μF) CASE CODE PART NUMBER 0.47 A 293D474(1)020A(2) 0.68 A 1.0 1.0 MAX. DCL AT +25 °C (μA) 20 VDC AT +85 °C; 13 VDC AT +125 °C 1.5 A 293D155(1)020A(2) 0.5 6 6.30 0.11 1.
PAGE 9
293D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 0.5 4 20.00 0.06 293D334(1)025A(2) 0.5 4 13.00 0.08 293D474(1)025A(2) 0.5 4 12.00 0.08 293D684(1)025A(2) 0.5 4 8.40 0.09 CAPACITANCE (μF) CASE CODE PART NUMBER 0.10 A 293D104(1)025A(2) 0.33 A 0.47 A 0.68 A MAX. DCL AT +25 °C (μA) 25 VDC AT +85 °C; 17 VDC AT +125 °C 1.0 A 293D105(1)025A(2) 0.5 4 7.60 0.10 1.
PAGE 10
293D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER 0.10 0.15 0.22 0.33 0.47 0.47 0.68 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 6.8 6.
PAGE 11
293D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) CAPACITANCE (μF) CASE CODE PART NUMBER 0.68 B 293D684(1)050B(2) 0.5 4 7.60 0.11 0.68 C 293D684(1)050C(2) 0.5 4 5.90 0.14 50 VDC AT +85 °C; 33 VDC AT +125 °C 1.0 B 293D105(1)050B(2) 0.5 4 6.70 0.11 1.0 C 293D105(1)050C(2) 0.5 4 4.60 0.16 1.5 B 293D155(1)050B(2) 0.8 6 6.00 0.12 1.
PAGE 12
293D www.vishay.com Vishay Sprague TYPICAL CURVES AT +25 °C, IMPEDANCE AND ESR VS. FREQUENCY 100 100 IMPEDANCE ESR IMPEDANCE ESR 10 10   4.7 μF, 10 VDC-B CASE 10 μ F, 16 VDC-C CASE 1 1 4.7 μF, 10 VDC-D CASE 0.1 1K 10K 100K 1M 10M 0.1 1K 100M 10K 100K 1M 10M 100M FREQUENCY Hz FREQUENCY Hz 100 100 IMPEDANCE ESR IMPEDANCE ESR 10 10   1 μF, 35 VDC-B CASE 6.8 μF, 20 VDC-C CASE 1 1 6.8 μF, 35 VDC-D CASE 22 μF, 20 VDC-D CASE 0.1 1K 10K 100K 1M 10M 100M 0.
PAGE 13
293D www.vishay.com Vishay Sprague STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2000 9000 B 2000 8000 C 500 3000 D 500 2500 E 400 1500 V 1000 4000 PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions www.vishay.com/doc?40074 Packaging Dimensions Moisture Sensitivity (MSL) www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.
PAGE 14
Molded Guide www.vishay.com Vishay Sprague Guide for Molded Tantalum Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum / tantalum oxide / manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology.
PAGE 15
Molded Guide www.vishay.com Vishay Sprague SOLID ELECTROLYTE TANTALUM CAPACITORS Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide.
PAGE 16
Molded Guide www.vishay.com Vishay Sprague COMMERCIAL PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES 793DX-CTC3CTC4 293D 593D TR3 TP3 TL3 High performance, automotive grade Very low DCL PRODUCT IMAGE Surface mount TANTAMOUNT™, molded case TYPE FEATURES Standard industrial grade CECC approved Low ESR TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE -55 °C to +125 °C 0.1 μF to 1000 μF 0.1 μF to 100 μF 1 μF to 470 μF 0.47 μF to 1000 μF 0.1 μF to 470 μF 0.
PAGE 17
Molded Guide www.vishay.com Vishay Sprague HIGH RELIABILITY PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TM3 T83 CWR11 TANTAMOUNT™, molded case, hi-rel. TANTAMOUNT™, molded case, hi-rel.
PAGE 18
Molded Guide www.vishay.com Vishay Sprague PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Tape thickness Deformation between embossments 0.014 [0.35] MAX. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] Top cover tape B1 MAX. (Note 6) Center lines of cavity 0.069 ± 0.004 [1.75 ± 0.10] Embossment 0.030 [0.75] MIN. (Note 3) B0 Top cover tape For tape feeder reference only including draft. Concentric around B0 (Note 5) 0.079 ± 0.002 [2.0 ± 0.05] A0 K0 0.004 [0.1] MAX.
PAGE 19
Molded Guide www.vishay.com Vishay Sprague RECOMMENDED REFLOW PROFILES Capacitors should withstand reflow profile as per J-STD-020 standard, three cycles. TEMPERATURE (°C) Tp TL Ts max. TC - 5 °C tp Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s tL Preheat area Ts min. ts 25 Time 25 °C to peak TIME (s) PROFILE FEATURE Preheat / soak Temperature min. (Ts min.) Temperature max. (Ts max.) Time (ts) from (Ts min. to Ts max.
PAGE 20
Molded Guide www.vishay.com Vishay Sprague GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: be established when calculating permissible operating levels. (Power dissipation calculated using +25 °C temperature rise). P -----------R ESR 6. power dissipation in W at +25 °C as given in the tables in the product datasheets (Power Dissipation).
PAGE 21
Typical Performance Characteristics www.vishay.com Vishay Sprague Molded Chip Tantalum Capacitors CAPACITOR ELECTRICAL PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Category temperature range -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance tolerance ± 20 %, ± 10 %. Tested via bridge method, at +25 °C, 120 Hz Dissipation factor Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz ESR Limit per Standard Ratings table.
PAGE 22
Typical Performance Characteristics www.vishay.com Vishay Sprague TYPICAL LEAKAGE CURRENT TEMPERATURE FACTOR 100 +175 °C +150 °C +125 °C 10 Leakage Current Factor +85 °C +55 °C 1 +25 °C 0 °C 0.1 -55 °C 0.01 0.
PAGE 23
Typical Performance Characteristics www.vishay.com Vishay Sprague MECHANICAL PERFORMANCE CHARACTERISTICS TEST CONDITION CONDITION POST TEST PERFORMANCE Terminal strength / shear force test Apply a pressure load of 17.7 N for 60 s horizontally to the center of capacitor side body. Capacitance change Dissipation factor Leakage current Within ± 10 % of initial value Initial specified limit Initial specified limit There shall be no mechanical or visual damage to capacitors post-conditioning.
PAGE 24
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.