Datasheet

ManualsBrandsVishay ManualsPassive ComponentsVishay 534B1202JC Precision potentiometer 10-pos Mono 2 W 2 kΩ 1 pc(s)

www.vishay.com

Model 533, 534, 535

Vishay Spectrol

Document Number: 57065

Revision 09-Jan-04

For technical questions, contact sfer@vishay.com

ADDITIONAL FEATURES

• Special Resistance Tolerances to 1%

• Rear Shaft Extensions and Support Bearing

• Non Turn Lug

• Dual Gang Configuration and Concentric Shafts

• High Torque and Center Tap

• Special Markings and Front Shaft Extensions

• Servo Unit available and Slipping Clutch

7/8” (22mm) Precision

Wirewound Potentiometer

The Models 533 (3 turn), 534 (10 turn) and 535 (5 turn) can be ordered by stating

534 1 2 XXX

MODEL MOUNTING NUMBER OF SECTIONS RESISTANCE EIA CODE

1. Bushing 1. Single section

2. Servo 2. Dual section

ORDERING INFORMATION

PARAMETER MODEL 533 MODEL 534 MODEL 535

Resistance Range

Standard Values 50Ω to 20KΩ 100Ω to 100KΩ 50Ω to 50KΩ

Capability Range 5Ω to 60KΩ 10Ω to 200KΩ 5Ω to 100KΩ

Standard Tol ± 5% ± 5% ± 5%

Linearity (Independent) ± 0.25% 0.20% ± 0.25%

Noise 100Ω ENR 100Ω ENR 100Ω ENR

Rotation (Electrical & Mechanical) 1080° + 10% 3600° + 10% 1800° ± 10°

Power Rating (@ 70°C) 1.0 watts 2.0 watts 1.5 watts

Insulation Resistance 1000MΩ minimum 500VDC

Dielectric Strength 1000V

RMS

minimum 60Hz

Absolute Minimum Resistance Not to exceed linearity x total resistance or 1Ω,

whichever is greater

Tempco 20ppm/°C (standard values, wire only)

End Voltage 0.25% of total applied voltage, maximum

Phasing CCW end points - section 2 phased to section 1 within ± 2°

Taps Center tap only

ELECTRICAL SPECIFICATIONS

Unit Manufacturer’s name and model number,

Identification resistance value and tolerance, linearity

specification date code and terminal

identification

MARKING

Ohms

533: 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K

534: 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K, 100K

535: 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K

RESISTANCE VALUES

Note: The color of this product is changing to blue, during

the internal period you may recieve either black or blue.

Summary of content (4 pages)

PAGE 1
Model 533, 534, 535 Vishay Spectrol 7/8” (22mm) Precision Wirewound Potentiometer ADDITIONAL FEATURES Note: The color of this product is changing to blue, during the internal period you may recieve either black or blue.
PAGE 2
Model 533, 534, 535 Vishay Spectrol 7/8” (22mm) Precision Wirewound Potentiometer SINGLE SECTION DIMENSIONS in millimeters 0.750 (19.05) ± 0.015 0.812 (20.62) ± 0.031 0.312 (7.92) ± 0.015 0.030 MAX (0.76) 0.062 (1.57) 0.200 MIN (5.08) 2 METRIC 1 3 30° TYP 0.0000 Ø 0.2497 (6.34) - 0.0003 R 0.625 (15.88) MAX Ø 0.875 (22.22) ± 0.015 0.032 (0.81) X 0.032 (0.81) DP ± 0.010 Ø 6.00mm 0.000 - 0.007 0.0000 Ø 0.4062 (10.32) - 0.0020 3/8 - 32UNEF - 2A 9mm x 0.75 P SCREWDRIVER SLOT 0.850 (21.59) ± 0.
PAGE 3
Model 533, 534, 535 Vishay Spectrol 7/8” (22mm) Precision Wirewound Potentiometer RESISTANCE ELEMENT DATA RESISTANCE VALUE (Ω) RESOLUTION % OHMS PER TURN MAX CURRENT AT 70°C MAX VOLTAGE ACROSS COIL AMBIENT (mA) (V) 533 534 535 533 534 535 533 534 535 533 534 535 533 534 535 50 – 50 0.149 – 0.120 0.0746 – 0.0603 141.0 – 173.0 7.07 – 8.66 100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2 200 200 200 0.097 0.037 0.
PAGE 4
Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.