Datasheet

ManualsBrandsVishay ManualsPassive ComponentsMulti Turn Wirewound Potentiometer 10kOhm 1.5W

Model 533, 534, 535

www.vishay.com

Vishay Spectrol

Revision: 17-May-2018

Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

" (22.2 mm) Multi Turn Wirewound Potentiometer -

533: 3 Turns / 534: 10 Turns / 535: 5 Turns

DESIGN SUPPORT TOOLS

FEATURES

• Bushing and servo mount designs available

• Linearity ± 0.25 %, down to 0.05 % on request

• Special resistance tolerances to 1 %

• Rear shaft extensions and support bearing

• Metric shaft available

• Dual gang configuration and concentric shafts

• High torque, center tap, slipping clutch on request

• Special markings and front shaft extensions

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

Sensor type ROTATIONAL, multi turn wirewound

Output type Output by turrets

Market appliance Industrial

Dimensions

" (22.2 mm)

click logo to get started

Available

Models

ELECTRICAL SPECIFICATIONS

PARAMETER MODEL 533 MODEL 534 MODEL 535

Resistance range - standard values 50  to 20 k 100  to 100 k 50  to 50 k

Capability range 5  to 60 k 10  to 200 k 5  to 100 k

Standard tolerance ± 5 % ± 5 % ± 5 %

Linearity (independent) ± 0.25 % ± 0.25 % ± 0.25 %

Noise 100  ENR 100  ENR 100  ENR

Rotation (electrical and mechanical)

1080°

+10°

-0°

3600° +10°

-0°

1800° +10°

-0°

Power rating (at 70 °C) 1.0 W 2.0 W 1.5 W

Insulation resistance 1000 M minimum 500 V

Dielectric strength 1000 V

RMS

minimum 60 Hz

Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater

Temperature coefficient 20 ppm/°C (standard values, wire only)

End voltage 0.25 % of total applied voltage, maximum

Phasing CCW end points - section 2 phased to section 1 within ± 2°

Taps Center tap only

MARKING

Unit identification

Manufacturer’s name and model number,

resistance value and tolerance, linearity

specification date code and terminal

identification.

Example of a marking for a standard part:

534-11103

RESISTANCE VALUES

533 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K

534 ( 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K

535 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K

Summary of content (4 pages)

PAGE 1
Model 533, 534, 535 www.vishay.com 7/ 8" Vishay Spectrol (22.2 mm) Multi Turn Wirewound Potentiometer 533: 3 Turns / 534: 10 Turns / 535: 5 Turns FEATURES • Bushing and servo mount designs available • Linearity ± 0.25 %, down to 0.
PAGE 2
Model 533, 534, 535 www.vishay.com Vishay Spectrol ORDERING INFORMATION 5 3 4 B 2 MODEL STYLE GANGS 533 534 535 B: bushing S: servo 1 2 1 0 3 OHMIC VALUE GANGS No 1 470 = 47  222 = 2.200  103 = 10 k For ohmic value range see electrical specification 2 0 OHMIC VALUE GANGS No 2 470 = 47  222 = 2.200  103 = 10 k For ohmic value range see electrical specification 3 J TOLERANCE ON OHMIC VALUE J=±5% F=±1% C 4 7 0 LINEARITY SPECIAL REQUEST C = ± 0.25 % L = ± 0.
PAGE 3
Model 533, 534, 535 www.vishay.com Vishay Spectrol MECHANICAL SPECIFICATIONS PARAMETER Bearing type Bushing: sleeve bearing Servo: ball bearing Torque (maximums): starting Section 1 Section 2 534 0.5 oz.-in (36 g-cm) 0.9 oz.-in (65 g-cm) 533/535 0.7 oz.-in (50 g-cm) 1.1 oz.-in (79 g-cm) Torque (maximums): running Section 1 Section 2 534 0.4 oz.-in (28.80 g-cm) 0.7 oz.-in (50.40 g-cm) 533/535 0.6 oz.-in (43.20 g-cm) 0.9 oz.-in (64.8 g-cm) Weight (maximums) Section1 Section 2 0.75 oz. (21.
PAGE 4
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.