Datasheet

ManualsBrandsVishay ManualsCapacitorsTantalum Capacitor, 10uF, 20V, 10%

593D

www.vishay.com

Vishay Sprague

Revision: 05-Jun-2018

Document Number: 40005

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Solid Tantalum Surface Mount Chip Capacitors

ANTAMOUNT™, Molded Case, Low ESR

Effective September 2005, new capacitor ratings will not be

added to the 593D series. All new ratings are available in the

TR3 series. The TR3 series offers state-of-the-art low ESR

for switch mode power supplies and DC/DC converters.

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

www.vishay.com/doc?40192

Operating Temperature: -55 °C to +125 °C

(above +85 °C voltage derating is required)

Capacitance Range: 0.47 μF to 680 μF

Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %

100 % Surge Current Tested (C, D and E Case Sizes)

Voltage Rating: 4 V

to 50 V

FEATURES

•Low ESR

• Molded case available in five case codes

• Terminations: 100 % matte tin standard,

tin / lead available

• High ripple current carrying capability

• Compatible with “high volume” automatic pick

and place equipment

• Qualified to EIA-717

• Moisture sensitivity level 1

• Compliant terminations

• Meets EIA-535-BAAC mechanical and performance

requirements

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details

APPLICATIONS

• Industrial

• Telecom infrastructure

• General purpose

Notes

• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.

Voltage substitutions will be marked with the higher voltage rating.

Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting

• Dry pack as specified in J-STD-033 for MSL3. Applicable for D and E cases only

Available

ORDERING INFORMATION

593D 107 X9 010 D 2WE3

TYPE CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE RATING

AT +85 °C

CASE CODE TERMINATION AND

PACKAGING

This is expressed in

picofarads. The first

two digits are the

significant figures.

The third is the number

of zeros to follow.

X0 = ± 20 %

X9 = ± 10 %

X5 = ± 5 %

(special order)

This is expressed in V.

To complete the three-digit

block, zeros precede the

voltage rating. A decimal

point is indicated by an “R”

(6R3 = 6.3 V).

See Ratings

and Case

Codes table

Matte tin

2TE3 = 7" (178 mm) reel

2WE3 = 13" (330 mm) reel

2DE3 = 7" (178 mm) reel,

dry pack

2RE3 = 13" (330 mm) reel,

dry pack

Tin / lead

8T = 7" (178 mm) reel

8W = 13" (330 mm) reel

8D = 7" (178 mm) reel,

dry pack

8R = 13" (330 mm) reel,

dry pack

Summary of content (18 pages)

PAGE 1
593D www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT™, Molded Case, Low ESR FEATURES Effective September 2005, new capacitor ratings will not be added to the 593D series. All new ratings are available in the TR3 series. The TR3 series offers state-of-the-art low ESR for switch mode power supplies and DC/DC converters. PERFORMANCE / ELECTRICAL CHARACTERISTICS www.vishay.
PAGE 2
593D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L W Glue Pad TH (MIN.) TW H Glue Pad P CASE CODE EIA SIZE L W H P TW TH (MIN.) A 3216-18 0.126 ± 0.008 [3.2 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.047 ± 0.004 [1.2 ± 0.10] 0.028 [0.70] B 3528-21 0.138 ± 0.008 [3.5 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.075 ± 0.008 [1.9 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.028 [0.
PAGE 3
593D www.vishay.com Vishay Sprague MARKING Capacitance code, pF Indicates lead (Pb)-free Date code designation V 104L Voltage code Polarity band A Case “A” CASE VOLTAGE CODE VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Voltage Capacitance μF Indicates lead (Pb)-free 22 10L XX 2 Polarity band Vishay marking Data code B, C, D, E Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating.
PAGE 4
593D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 150 150 150 220 220 330 470 470 680 B C D C D D D E E 10 15 22 22 33 33 47 47 68 68 100 100 100 150 150 150 220 220 330 330 470 A A A B A B B C B C B C D C D E D E D E E 4.7 6.8 10 15 15 22 22 22 33 33 47 47 47 68 68 A A A A B A B C B C B C D C D PART NUMBER MAX. DCL AT +25 °C (μA) 4 VDC AT +85 °C; 2.7 VDC AT +125 °C 593D157(1)004B(2) 6.0 593D157(1)004C(2) 6.0 593D157(1)004D(4) 6.0 593D227(1)004C(2) 8.
PAGE 5
93D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 100 100 150 150 220 220 330 C D D E D E E 1.0 3.3 4.7 4.7 6.8 10 10 10 15 15 22 22 33 33 33 47 47 68 100 100 150 A A A B A A B C B C B C B C D C D D D E E 1.0 2.2 3.3 4.7 4.7 6.8 10 10 15 15 22 22 33 33 47 47 68 68 100 A A A A B B B C B C C D C D D E D E E PART NUMBER MAX. DCL AT +25 °C (μA) 10 VDC AT +85 °C; 7 VDC AT +125 °C 593D107(1)010C(2) 10.0 593D107(1)010D(4) 10.0 593D157(1)010D(4) 15.0 593D157(1)010E(4) 15.
PAGE 6
593D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 1.0 1.5 2.2 2.2 3.3 4.7 4.7 6.8 10 15 15 22 33 33 47 A A A B B B C C C C D D D E E 0.47 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 4.7 6.8 6.8 10 10 15 15 22 22 A A A B B C B C C C C D C D D E D E 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 B C B C C D C D D E D E D E PART NUMBER MAX. DCL AT +25 °C (μA) 25 VDC AT +85 °C; 17 VDC AT +125 °C 593D105(1)025A(2) 0.5 593D155(1)025A(2) 0.5 593D225(1)025A(2) 0.
PAGE 7
593D www.vishay.com Vishay Sprague POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR A 0.075 B 0.085 C 0.110 D 0.150 E 0.165 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2000 9000 B 2000 8000 C 500 3000 D 500 2500 E 400 1500 PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions www.vishay.com/doc?40074 Packaging Dimensions Moisture Sensitivity (MSL) www.vishay.
PAGE 8
Molded Guide www.vishay.com Vishay Sprague Guide for Molded Tantalum Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum / tantalum oxide / manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology.
PAGE 9
Molded Guide www.vishay.com Vishay Sprague SOLID ELECTROLYTE TANTALUM CAPACITORS Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide.
PAGE 10
Molded Guide www.vishay.com Vishay Sprague COMMERCIAL PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES 793DX-CTC3CTC4 293D 593D TR3 TP3 TL3 High performance, automotive grade Very low DCL PRODUCT IMAGE Surface mount TANTAMOUNT™, molded case TYPE FEATURES Standard industrial grade CECC approved Low ESR TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE -55 °C to +125 °C 0.1 μF to 1000 μF 0.1 μF to 100 μF 1 μF to 470 μF 0.47 μF to 1000 μF 0.1 μF to 470 μF 0.
PAGE 11
Molded Guide www.vishay.com Vishay Sprague HIGH RELIABILITY PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TM3 T83 CWR11 TANTAMOUNT™, molded case, hi-rel. TANTAMOUNT™, molded case, hi-rel.
PAGE 12
Molded Guide www.vishay.com Vishay Sprague PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Tape thickness Deformation between embossments 0.014 [0.35] MAX. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] Top cover tape B1 MAX. (Note 6) Center lines of cavity 0.069 ± 0.004 [1.75 ± 0.10] Embossment 0.030 [0.75] MIN. (Note 3) B0 Top cover tape For tape feeder reference only including draft. Concentric around B0 (Note 5) 0.079 ± 0.002 [2.0 ± 0.05] A0 K0 0.004 [0.1] MAX.
PAGE 13
Molded Guide www.vishay.com Vishay Sprague RECOMMENDED REFLOW PROFILES Capacitors should withstand reflow profile as per J-STD-020 standard, three cycles. TEMPERATURE (°C) Tp TL Ts max. TC - 5 °C tp Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s tL Preheat area Ts min. ts 25 Time 25 °C to peak TIME (s) PROFILE FEATURE Preheat / soak Temperature min. (Ts min.) Temperature max. (Ts max.) Time (ts) from (Ts min. to Ts max.
PAGE 14
Molded Guide www.vishay.com Vishay Sprague GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: be established when calculating permissible operating levels. (Power dissipation calculated using +25 °C temperature rise). P -----------R ESR 6. power dissipation in W at +25 °C as given in the tables in the product datasheets (Power Dissipation).
PAGE 15
Typical Performance Characteristics www.vishay.com Vishay Sprague Molded Chip Tantalum Capacitors CAPACITOR ELECTRICAL PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Category temperature range -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance tolerance ± 20 %, ± 10 %. Tested via bridge method, at +25 °C, 120 Hz Dissipation factor Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz ESR Limit per Standard Ratings table.
PAGE 16
Typical Performance Characteristics www.vishay.com Vishay Sprague TYPICAL LEAKAGE CURRENT TEMPERATURE FACTOR 100 +175 °C +150 °C +125 °C 10 Leakage Current Factor +85 °C +55 °C 1 +25 °C 0 °C 0.1 -55 °C 0.01 0.
PAGE 17
Typical Performance Characteristics www.vishay.com Vishay Sprague MECHANICAL PERFORMANCE CHARACTERISTICS TEST CONDITION CONDITION POST TEST PERFORMANCE Terminal strength / shear force test Apply a pressure load of 17.7 N for 60 s horizontally to the center of capacitor side body. Capacitance change Dissipation factor Leakage current Within ± 10 % of initial value Initial specified limit Initial specified limit There shall be no mechanical or visual damage to capacitors post-conditioning.
PAGE 18
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.