Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysCNY17F-3 Optocoupler DIP-6 Type (misc.) Phototransistor/Single

Document Number: 83606 For technical questions, contact: optocoupler.answers@vishay.com

www.vishay.com

Rev. 1.5, 09-Nov-05 1

Optocoupler, Phototransistor Output,

with Base Connection

CNY17

Vishay Semiconductors

DESCRIPTION

The CNY17 is an optically coupled pair consisting of a

gallium arsenide infrared emitting diode optically coupled to

a silicon NPN phototransitor.

Signal information, including a DC level, can be transmitted

by the device while maintaining a high degree of electrical

isolation between input and output.

The CNY17 can be used to replace relays and transformers

in many digital interface applications, as well as analog

applications such as CRT modulation.

FEATURES

• Isolation test voltage 5300 V

RMS

• Long term stability

• Industry standard dual-in-line package

• Lead (Pb)-free component

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

AGENCY APPROVALS

• Underwriters lab file no. E52744 system code H or J

• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending

• BSI IEC 60950 IEC 60065

•FIMKO

Note

For additional information on the available options refer to option information.

i179004

ORDER INFORMATION

PART REMARKS

CNY17-1 CTR 40 to 80 %, DIP-6

CNY17-2 CTR 63 to 125 %, DIP-6

CNY17-3 CTR 100 to 200 %, DIP-6

CNY17-4 CTR 160 to 320 %, DIP-6

CNY17-1X006 CTR 40 to 80 %, DIP-6 400 mil (option 6)

CNY17-1X007 CTR 40 to 80 %, SMD-6 (option 7)

CNY17-1X009 CTR 40 to 80 %, SMD-6 (option 9)

CNY17-2X006 CTR 63 to 125 %, DIP-6 400 mil (option 6)

CNY17-2X007 CTR 63 to 125 %, SMD-6 (option 7)

CNY17-2X009 CTR 63 to 125 %, SMD-6 (option 9)

CNY17-3X006 CTR 100 to 200 %, DIP-6 400 mil (option 6)

CNY17-3X007 CTR 100 to 200 %, SMD-6 (option 7)

CNY17-3X009 CTR 100 to 200 %, SMD-6 (option 9)

CNY17-4X006 CTR 160 to 320 %, DIP-6 400 mil (option 6)

CNY17-4X007 CTR 160 to 320 %, SMD-6 (option 7)

CNY17-4X009 CTR 160 to 320 %, SMD-6 (option 9)

ABSOLUTE MAXIMUM RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage V

6.0 V

Forward current I

60 mA

Surge current t ≤ 10 µs I

FSM

2.5 A

Power dissipation P

diss

100 mW

Summary of content (9 pages)

PAGE 1
CNY17 Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection FEATURES • Isolation test voltage 5300 VRMS • Long term stability A 1 6 B C 2 5 C • Lead (Pb)-free component NC 3 4 E • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • Industry standard dual-in-line package i179004 AGENCY APPROVALS DESCRIPTION • Underwriters lab file no.
PAGE 2
CNY17 Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT OUTPUT Collector emitter breakdown voltage BVCEO 70 V Emitter base breakdown voltage BVEBO 7.0 V mA IC 50 IC 100 mA Pdiss 150 mW VISO 5300 VRMS Creepage distance ≥ 7.0 mm Clearance distance ≥ 7.0 mm Isolation thickness between emitter and detector ≥ 0.
PAGE 3
CNY17 Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION VCE = 5.0 V, IF = 10 mA IC/IF VCE = 5.0 V, IF = 1 mA PART SYMBOL MIN. TYP. MAX.
PAGE 4
CNY17 Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 1000 (TA = 0 °C, VCE = 5 V) IC/IF = f (IF) V CC = 5 V IC IC (%) IF R L = 75 Ω IF 100 1 2 3 4 10 47 Ω 1 0.1 icny17_01 1 Fig. 1 - Linear Operation (without Saturation) 10 IF (mA) icny17_04 Fig. 4 - Current Transfer Ratio vs.
PAGE 5
CNY17 Optocoupler, Phototransistor Output, with Base Connection 40 1000 (TA = 75 °C, VCE = 5 V) IC/IF = f (IF) IC = f (VCE) 30 IF = 14 mA 100 IC IC (%) IF Vishay Semiconductors 1 2 3 4 10 IF = 12 mA 20 IF =10 mA IF = 7 mA 10 IF = 5 mA IF = 1 mA 1 0 0.1 1 0 10 5 10 15 VCE (V) icny17_10 IF (mA) icny17_07 Fig. 10 - Output Characteristics Fig. 7 - Current Transfer Ratio vs. Diode Current 1000 1.2 VF = f (IF) (IF = 10 mA, VCE = 5 V) IC/IF = f (T) 25 °C 50 °C 75 °C 4 1.
PAGE 6
CNY17 Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection 1.0 1.0 VCEsat = f (IC) 0.9 0.9 0.7 0.7 VCE sat (V) IF = 3 x IC VCE sat 0.6 0.5 0.4 0.6 0.4 0.3 0.2 0.2 0.1 0.1 0 1 10 IF = 2 x IC IF = 3 x IC 1 100 IC (mA) icny17_13 IF = IC 0.5 0.3 0 10 100 IC (mA) icny17_16 Fig. 13 - Saturation Voltage vs. Collector Current and Modulation Depth CNY17-1 Fig. 16 - Saturation Voltage vs. Collector Current and Modulation Depth CNY17-4 1.
PAGE 7
CNY17 Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 0.248 (6.30) 0.256 (6.50) ISO Method A 0.335 (8.50) 0.343 (8.70) 0.039 (1.00) min. 0.300 (7.62) typ. 0.048 (0.45) 0.022 (0.55) 0.130 (3.30) 0.150 (3.81) 18° 4° typ. 0.031 (0.80) min. 0.031 (0.80) 3°to 9° 0.035 (0.90) 0.018 (0.45) 0.022 (0.55) 0.100 (2.54) typ. 0.010 (0.25) typ. 0.114 (2.90) 0.130 (3.0) 0.300 to 0.347 (7.62 to 8.
PAGE 8
CNY17 Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
PAGE 9
Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.