Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIL-6 30 V

CNY17

www.vishay.com

Vishay Semiconductors

Rev. 2.1, 08-Jan-14

Document Number: 83606

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, with Base Connection

DESCRIPTION

The CNY17 is an optically coupled pair consisting of a

gallium arsenide infrared emitting diode optically coupled to

a silicon NPN phototransitor.

Signal information, including a DC level, can be transmitted

by the device while maintaining a high degree of electrical

isolation between input and output.

The CNY17 can be used to replace relays and transformers

in many digital interface applications, as well as analog

applications such as CRT modulation.

FEATURES

• Isolation test voltage: 5000 V

RMS

• Long term stability

• Industry standard dual-in-line package

• Material categorization:

For definitions of compliance please see

www.vishay.com/doc?99912

AGENCY APPROVALS

Safety application model number covering all products in

this datasheet is CNY17. This model number should be used

when consulting safety agency documents.

• UL file no. E52744

• cUL tested to CSA 22.2 bulletin 5A

• DIN EN 60747-5-5 (VDE 0884-5)

• BSI IEC 60950, IEC 60065

• FIMKO EN60950

• CQC GB8898-2011

Note

(1)

Also available in tubes, do not put T on the end.

i179004-14

ORDERING INFORMATION

CNY 1 7 - # X 0 # # T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE CTR (%)

UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320

DIP-6 CNY17-1 CNY17-2 CNY17-3 CNY17-4

DIP-6, 400 mil, option 6 CNY17-1X006 CNY17-2X006 CNY17-3X006 CNY17-4X006

SMD-6, option 7 CNY17-1X007T

(1)

CNY17-2X007T

(1)

CNY17-3X007T

(1)

CNY17-4X007T

(1)

SMD-6, option 9 CNY17-1X009T

(1)

CNY17-2X009T

(1)

CNY17-3X009T

(1)

CNY17-4X009T

(1)

VDE, UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320

DIP-6 CNY17-1X001 CNY17-2X001 CNY17-3X001 CNY17-4X001

DIP-6, 400 mil, option 6 CNY17-1X016 CNY17-2X016 CNY17-3X016 CNY17-4X016

SMD-6, option 7 CNY17-1X017 CNY17-2X017T

(1)

CNY17-3X017T

(1)

CNY17-4X017T

(1)

SMD-6, option 9 - CNY17-2X019T

(1)

7.62 mm 10.16 mm

> 8 mm

8 mm typ.

Option 7

Option 6

Option 9

DIP-6

Summary of content (9 pages)

PAGE 1
CNY17 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection FEATURES 6 • Isolation test voltage: 5000 VRMS A 1 C 2 5 C • Industry standard dual-in-line package NC 3 4 E • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 B • Long term stability AGENCY APPROVALS Safety application model number covering all products in this datasheet is CNY17.
PAGE 2
CNY17 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp ≤ 10 μs IFSM 2.5 A LED power dissipation at 25 °C Pdiss 100 mW Collector emitter breakdown voltage BVCEO 70 V Emitter base breakdown voltage BVEBO 7 V IC 50 mA IC 100 mA Pdiss 150 mW OUTPUT Collector current tp/T = 0.
PAGE 3
CNY17 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION OUTPUT Collector emitter capacitance Collector base capacitance Emitter base capacitance Thermal resistance COUPLER Collector emitter, saturation voltage Coupling capacitance Collector emitter, leakage current PART SYMBOL MIN. TYP. VCE = 5 V, f = 1 MHz VCE = 5 V, f = 1 MHz VCE = 5 V, f = 1 MHz CCE CCB CEB Rth 5.2 6.5 7.5 500 VF = 10 mA, IC = 2.
PAGE 4
CNY17 www.vishay.com +5V IF IF Vishay Semiconductors IF 0 0 tp IC R G = 50 Ω tp = 0.01 T t 100 % 90 % t p = 50 µs Channel I Channel II 50 Ω Oscilloscope R L = 1 MΩ C L = 20 pF 10 % 0 tr RL td ts t on 95 10804-3 Fig. 2 - Test Circuit, Non-Saturated Operation IF tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time tf t off ts tf t off (= ts + tf) t Storage time Fall time Turn-off time 96 11698 +5V I F = 10 mA 0 Fig. 4 - Switching Times IC R G = 50 Ω tp = 0.
PAGE 5
CNY17 www.vishay.com Vishay Semiconductors 1.8 1.7 Tamb = 25 °C 1.6 Tamb = 0 °C 1.5 1.4 Tamb = - 25 °C 1.3 T = - 55 °C amb 1.2 1.1 Tamb = 50 °C 1.0 Tamb = 75 °C 0.9 Tamb = 100 °C 0.8 0.7 Tamb = 110 °C 0.6 0.1 1 10 100 10 000 IF = 0 mA ICE0 - Leakage Current (nA) VF - Forward Voltage (V) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 100 VCE = 24 V 10 VCE = 12 V 1 0.1 0.01 0.
PAGE 6
CNY17 www.vishay.com 1000 1.2 IF = 10 mA VCE = 5 V fCTR - -3 dB Frequency (kHz) CTRNorm - Normalized CTR (NS) Vishay Semiconductors Tamb = 25 °C 1.0 Tamb = 0 °C 0.8 Tamb = - 40 °C Tamb = - 55 °C 0.6 Tamb = 50 °C Tamb = 75 °C 0.4 Tamb = 100 °C 0.2 VCC = 5 V 100 10 Tamb = 110 °C 0 0.1 1 1 0.1 100 10 1 10 100 IF - Forward Current (mA) IC - Collector Current (mA) Fig. 11 - Normalized CTR (NS) vs. Forward Current Fig. 14 - CTR -3 dB Frequency vs.
PAGE 7
CNY17 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6 5 4 6.5 ± 0.5 1 2 3 7.3 ± 0.5 7.62 ± 0.3 1.1 ± 0.1 3.5 ± 0.3 0.5 typ. 3.3 ± 0.5 2.8 ± 0.5 0.26 0.5 ± 0.1 2.54 ± 0.25 7.62 to 9.98 22530 Option 6 Option 7 7.62 typ. 7.62 typ. 3.5 ± 0.3 7.62 typ. 3.5 ± 0.3 0.35 ± 0.25 0.1 min. Option 9 0.6 min. 8 min. 2.7 min. 10.16 typ. 0.1 ± 0.1 0.6 min. 3.5 ± 0.3 8.16 ± 0.8 10.16 ± 0.3 10.3 max. 0.76 2.54 R 0.25 0.76 2.54 R 0.25 1.78 8 min. 11.
PAGE 8
CNY17 www.vishay.com Vishay Semiconductors TUBE AND TAPE INFORMATION DEVICES PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-6 50 40 2000 Ø 1.55 ± 0.05 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 7.5 ± 0.1 16 ± 0.3 12 ± 0.1 0.3 ± 0.05 22537-1 Fig. 16 - Tape and Reel Drawing, 1000 Units per Reel Document Number: 83606 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.