Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIL-6 70 V

www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com

Document Number: 83536

254 Rev. 2.0, 28-Oct-09

CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC

Vishay Semiconductors

Optocoupler, Phototransistor Output, with Base Connection

DESCRIPTION

The CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB,

CNY75GC consists of a phototransistor optically coupled to

a gallium arsenide infrared-emitting diode in a 6 pin plastic

dual inline package.

AGENCY APPROVALS

• UL1577, file no. E52744, double protection

• BSI: BS EN 41003, BS EN 60095 (BS 415), BS EN 60950

(BS 7002), pending

• DIN EN 60747-5-5 (VDE 0884)

• FIMKO (SETI): EN 60950, certificate no. FI25155

FEATURES

• Isolation materials according to UL 94-VO

• Pollution degree 2 (DIN/VDE 0110/resp.

IEC 60664)

• Climatic classification 55/110/21 (IEC 60068

part 1)

• Low temperature coefficient of CTR

• CTR offered in 3 groups

• Rated isolation voltage (RMS includes DC)

IOWM

= 600 V

RMS

(848 V peak)

• Rated recurring peak voltage (repetitive)

IORM

= 600 V

RMS

• Rated impulse voltage (transient overvoltage)

IOTM

= 6 kV

peak

• Isolation test voltage (partial discharge test voltage)

= 1.6 kV

• Creepage current resistance according to VDE 0303/

IEC 60112 comparative tracking index: CTI ≥ 325

• Thickness through insulation ≥ 0.4 mm

• Compliant to RoHS directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

APPLICATIONS

• Switch-mode power supplies

• Line receiver

• Computer peripheral interface

• Microprocessor system interface

• Circuits for safe protective separation against electrical

shock according to safety class II (reinforced isolation):

- for appl. class I - IV at mains voltage ≤ 300 V

- for appl. class I - III at mains voltage ≤ 600 V

according to DIN EN 60747-5-5 (VDE 0884)

Note

(1)

G = leadform 10.16 mm; G is not marked on the body.

18537_5

231

546

NCC (-)A (+)

17201_4

ORDER INFORMATION

(1)

PART REMARKS

CNY75A CTR 63 % to 125 %, DIP-6

CNY75B CTR 100 % to 200 %, DIP-6

CNY75C CTR 160 % to 320 %, DIP-6

CNY75GA CTR 63 % to 125 %, DIP-6, 400 mil

CNY75GB CTR 100 % to 200 %, DIP-6, 400 mil

CNY75GC CTR 160 % to 320 %, DIP-6, 400 mil

Summary of content (6 pages)

PAGE 1
CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection FEATURES B 6 C 5 E 4 • Isolation materials according to UL 94-VO • Pollution degree IEC 60664) 2 (DIN/VDE 0110/resp.
PAGE 2
CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC Optocoupler, Phototransistor Output, Vishay Semiconductors with Base Connection ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT VR IF IFSM Pdiss Tj 5 60 3 70 125 V mA A mW °C VCBO VCEO VECO IC ICM Pdiss Tj 70 70 7 50 100 70 125 V V V mA mA mW °C VISO Ptot Tamb Tstg Tsld 5000 200 - 55 to + 110 - 55 to + 125 260 VRMS mW °C °C °C INPUT Reverse voltage Forward current Forward surge current Power dissipation Junction tempera
PAGE 3
CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection CURRENT TRANSFER RATIO PARAMETER TEST CONDITION VCE = 5 V, IF = 1 mA IC/IF VCE = 5 V, IF = 10 mA PART SYMBOL MIN. CNY75GA CTR 15 TYP. MAX. UNIT % CNY75GB CTR 30 % CNY75GC CTR 60 CNY75GA CTR 63 125 % CNY75GB CTR 100 200 % CNY75GC CTR 160 320 % MAX.
PAGE 4
CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC Optocoupler, Phototransistor Output, Vishay Semiconductors with Base Connection MAXIMUM SAFETY RATINGS PARAMETER (1) TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF 130 mA Pdiss 265 mW VIOTM 6 kV Tsi 150 °C INPUT Forward current OUTPUT Power dissipation COUPLER Rated impulse voltage Safety temperature Note (1) According DIN EN 60747-5-5. This optocoupler is suitable for safe electrical isolation only within the safety ratings.
PAGE 5
CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection PACKAGE DIMENSIONS in millimeters DIP-6 7.62 typ. 7.12 ± 0.3 3.5 ± 0.3 6.5 ± 0.3 0.5 ± 0.1 1.2 ± 0.1 14771_2 6 5 1 2 3 4.5 ± 0.3 2.8 ± 0.15 4.5 ± 0.3 0.25 4 7.62 to 9.5 typ. DIP-6, 400 mil 7.62 typ. 7.12 ± 0.3 3.5 ± 0.3 6.5 ± 0.3 0.5 ± 0.1 1.2 ± 0.1 4.5 ± 0.3 2.8 ± 0.15 4.5 ± 0.3 0.25 10.16 (typ.
PAGE 6
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.