Datasheet

ManualsBrandsVishay ManualsAluminium Electrolytic CapacitorsSMD Electrolytic Capacitor, 100uF, 63V, 20%

GRC

www.vishay.com

Vishay

Revision: 03-Sep-12

Document Number: 28007

For technical questions, contact: aluminumcaps5@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Electrolytic Capacitors

FEATURES

• Polarized aluminum electrolytic capacitors,

non-solid electrolyte

• Radial leads, cylindrical aluminum case

• Pressure relief for case Ø D ≥ 6.3 mm

• High CV per unit volume

• Ø 5 mm to Ø 25 mm, 105 °C, 2000 h endurance

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Decoupling, smoothing, filtering, buffering in SMPS

• General industrial, telecom, and domestic appliances

• Portable and mobile equipment (small size, low mass)

Note

(1)

See “Taping Specifications”

QUICK REFERENCE DATA

DESCRIPTION UNIT VALUE

Nominal case sizes (Ø D x L) mm 5 x 11 to 25 x 45

Rated capacitance range μF 1 to 33 000

Capacitance tolerance % ± 20 (at 120 Hz, 20 °C)

Rated voltage range V

6.3 to 450

Category temperature range: °C - 40 to + 105

Endurance h 2000

Shelf life h 1000

ORDERING INFORMATION

Part number example: GRC00FE1021VTFL

GRC 00 FE 102 1V TF L

SERIES

NAME

DESIGN/

FORMING

DIMENSIONS CAPACITANCE VOLTAGE PACKING INTERNAL

CODE

See

“Dimensions”

table

See

“Selection Chart”

See

“Selection Chart”

00 = Bulk

TF = Ammopack, formed lead

(1)

TN = Ammopack, straight lead

(1)

Summary of content (7 pages)

PAGE 1
GRC www.vishay.com Vishay Aluminum Electrolytic Capacitors FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case • Pressure relief for case Ø D ≥ 6.3 mm • High CV per unit volume • Ø 5 mm to Ø 25 mm, 105 °C, 2000 h endurance • Material categorization: For definitions of compliance please see www.vishay.
PAGE 2
GRC www.vishay.com Vishay ADDITIONAL ELECTRICAL DATA LEAKAGE CURRENT (Test conditions: UR, 20 °C) RATED VOLTAGE TIME 6.3 V to 100 V after 2 min 160 V to 450 V after 5 min CV VALUE I = 0.01 CV or 3 (μA), whichever is greater CV ≤ 1000 I = 0.03 CV + 15 (μA) CV > 1000 I = 0.02 CV + 25 (μA) Notes • Where, C = Rated capacitance in μF • V = Rated DC working voltage in V DISSIPATION FACTOR (tan δ at 120 Hz, 20 °C) RATED VOLTAGE 6.
PAGE 3
GRC www.vishay.com Vishay DIMENSIONS in millimeters Sleeve CASE SIZE CODE ØD 15 min. 4 min. F ± 0.5 L Ød Vent ≥ 6.3 Ø Ø D + 0.5 L Ød F ± 0.5 11 ± 1.0 0.5 2 AA 5 x 11 5 BA 6.3 x 11 6.3 11 ± 1.0 0.5 2.5 PB 8 x 11.5 8 11.5 ± 1.0 0.6 3.5 DC 10 x 12.5 10 12.5 ± 1.5 0.6 5 DD 10 x 16 10 16 ± 1.5 0.6 5 DE 10 x 20 10 20 ± 2.0 0.6 5 DG 10 x 25 10 25 ± 2.0 0.6 5 FD 12.5 x 16 12.5 16 ± 1.5 0.6 5 FE 12.5 x 20 12.5 20 ± 2.0 0.6 5 FG 12.5 x 25 12.
PAGE 4
GRC www.vishay.com Vishay SELECTION CHART, DIMENSIONS, AND PERMISSIBLE RIPPLE CURRENT (at 120 Hz/105 °C) VDC 6.3 V (0J) CAP. CODE ØDxL mA 10 V (1A) ØDxL mA 16 V (1C) ØDxL mA 25 V (1E) ØDxL 35 V (1V) mA ØDxL 50 V (1H) mA ØDxL mA 63 V (1J) ØDxL mA 2.2 2R2 5 x 11 20 3.3 3R3 5 x 11 30 4.7 4R7 5 x 11 33 10 100 5 x 11 50 22 220 5 x 11 78 6.3 x 11 86 33 330 47 470 100 101 220 221 330 331 470 471 6.3 x 11 1000 102 2200 5 x 11 75 5 x 11 90 6.
PAGE 5
GRC www.vishay.com Vishay SELECTION CHART, DIMENSIONS, AND PERMISSIBLE RIPPLE CURRENT (at 120 Hz/105 °C) VDC 100 V (2A) CAP. CODE ØDxL mA 160 V (2C) ØDxL mA 200 V (2D) ØDxL mA 250 V (2E) ØDxL mA 350 V (2V) ØDxL mA 400 V (2G) 450 V (2W) ØDxL mA ØDxL mA 6.3 x 11 21 8 x 11.5 27 1.0 010 2.2 2R2 5 x 11 30 6.3 x 11 30 6.3 x 11 35 6.3 x 11 35 8 x 11.5 39 8 x 11.5 39 3.3 3R3 5 x 11 31 6.3 x 11 39 6.3 x 11 40 8 x 11.5 43 8 x 11.5 45 8 x 11.5 45 4.
PAGE 6
GRC www.vishay.com P ΔH P2 ΔH ØD P0 l Base tape Base tape Adhesive tape t W W2 P0 Fig. 1 P2 P Adhesive tape l Ø 0 D0 ØD t W A W1 H W2 W0 W1 H H0 A Ød P1 F W0 Ød F P1 P L ØD L P2 Vishay Fig. 3 ΔH ØD P2 ΔH P L L ØD W W2 H W1 A t t 0 0 ØD ØD Adhesive tape Base tape P0 l P0 l Base tape W0 W2 Ød P1 F W A W1 W0 Ød H P1 F Fig. 2 Adhesive tape Fig.
PAGE 7
GRC www.vishay.com Vishay 300 Max. PACKAGING Label 55 Max. 330 Fig. 5 - Ammopack box PACKAGING QUANTITY (pcs per box) Ø D (mm) 3 4 5 6.3 8 10 12.5 TF, TN 3000 2000 2000 2000 1000 500 300 Note • The component shall be oriented on the tape as such that the positive lead is leading or the negative lead is leading with customer’s request Revision: 03-Sep-12 Document Number: 28007 7 For technical questions, contact: aluminumcaps5@vishay.