Datasheet

ManualsBrandsVishay ManualsAluminium Electrolytic CapacitorsSMD Electrolytic Capacitor, 100uF, 50V, 20%

GSC

www.vishay.com

Vishay

Revision: 15-Oct-14

Document Number: 28005

For technical questions, contact: aluminumcaps5@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMD Aluminum Electrolytic Capacitors

FEATURES

• Polarized aluminum electrolytic capacitors,

non-solid electrolyte

• SMD version with base plate, vertical

construction, requiring minimum board space

• High CV per unit volume

• Ø 4 mm to Ø 18 mm, 105 °C, 2000 h endurance

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• SMD technology

• Coupling, decoupling, smoothing, filtering, buffering,

timing

• Telecommunications, general industrial, EDP, portable

and lightweight equipment

QUICK REFERENCE DATA

DESCRIPTION UNIT VALUE

Nominal case sizes (Ø D) mm 4 x 5.7 to 18 x 21.5

Rated capacitance range μF 0.22 to 8200

Capacitance tolerance % ± 20 (at 120 Hz, 20 °C)

Rated voltage range V

6.3 to 100 160 to 450

Category temperature range °C -55 to +105 -40 to +105

Endurance h 2000

Shelf life h 1000

ORDERING INFORMATION

Part number example: GSC00BX2211HARL

GSC 00 BX 221 1H AR L

SERIES

NAME

DESIGN /

FORMING

DIMENSIONS CAPACITANCE VOLTAGE PACKING INTERNAL

CODE

See “Dimensions” table See “Selection Chart” See “Selection Chart” Tape and

Reel

Summary of content (5 pages)

PAGE 1
GSC www.vishay.com Vishay SMD Aluminum Electrolytic Capacitors FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte • SMD version with base plate, vertical construction, requiring minimum board space • High CV per unit volume • Ø 4 mm to Ø 18 mm, 105 °C, 2000 h endurance • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
GSC www.vishay.com Vishay ADDITIONAL ELECTRICAL DATA LEAKAGE CURRENT (Test conditions: UR, 20 °C) RATED VOLTAGE TIME 6.3 V to 100 V CASE SIZE VALUE Ø 4 mm to Ø 10 mm I = 0.01 CV or 3 μA, whichever is greater Ø 12.5 mm to Ø 18 mm I = 0.03 CV or 4 μA, whichever is greater Ø 12.5 mm to Ø 18 mm I = 0.04 CV + 100 μA after 2 min 160 V to 450 V after 5 min Notes • Where, C = rated capacitance in μF • V = rated DC working voltage in V DISSIPATION FACTOR (tan at 120 Hz, 20 °C) RATED VOLTAGE 6.
PAGE 3
GSC www.vishay.com Vishay DIMENSIONS in millimeters Vent ≥ Ø 8 x 10 L Fig. 1 B ± 0.2 Ø D ± 0.5 - 0.3 max. L A ± 0.2 0.4 max. W + P C ± 0.2 Fig. 2 Vent Ø D ± 0.5 B ± 0.2 0.4 max. L A ± 0.2 1.0 max. W + P C ± 0.2 CASE SIZE CODE ØD L A B C W P ± 0.2 FIG. NO. AB 4 x 5.7 4 5.7 ± 0.3 4.3 4.3 5.1 0.5 to 0.8 1.0 1 AC 5 x 5.7 5 5.7 ± 0.3 5.3 5.3 5.9 0.5 to 0.8 1.5 1 AD 6.3 x 5.7 6.3 5.7 ± 0.3 6.6 6.6 7.2 0.5 to 0.8 2.0 1 BM 6.3 x 7.7 6.3 7.7 ± 0.3 6.
PAGE 4
GSC www.vishay.com Vishay SELECTION CHART, DIMENSIONS, AND PERMISSIBLE RIPPLE CURRENT (at 120 Hz / 105 °C) VDC 6.3 (0J) CAP. CODE ØDxL 10 (1A) mA ØDxL 1.0 2.2 3.3 4.7 010 2R2 3R3 4R7 10 100 22 220 4 x 5.7 22 4 x 5.7 33 330 5 x 5.7 34 47 470 5 x 5.7 100 101 220 16 (1C) mA ØDxL 25 (1E) mA ØDxL 35 (1V) mA ØDxL 50 (1H) 63 (1J) mA ØDxL mA ØDxL mA 8 12 14 20 4 x 5.7 4 x 5.7 5 x 5.7 6.3 x 5.7 6.3 x 5.7 8 x 6.5 8 12 17 22 32 51 4 x 5.7 17 4 x 5.7 17 4 x 5.7 4 x 5.
PAGE 5
GSC www.vishay.com Vishay SOLDERING b c a : pad Recommended soldering pad dimensions RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE SIZE (Ø) 3 4 5 6.3 8 x 6.5 8 10 12.5 16 18 LAND SIZE b 2.2 2.6 3.0 3.5 4.0 3.5 4.0 6.0 7.0 8.0 a 0.8 1.0 1.4 1.9 2.1 3.0 4.0 4.0 6.0 6.0 c 1.6 1.6 1.6 1.6 1.6 2.5 2.5 3.2 3.2 3.