Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysOptocoupler DIP 16 Type (misc.) Phototransistor/Quad

VISHAY

ILD615/ ILQ615

Document Number 83652

Rev. 1.3, 19-Apr-04

Vishay Semiconductors

www.vishay.com

i179052

Dual Channel

Quad Channel

Optocoupler, Phototransistor Output (Dual, Quad Channel)

Features

• Identical Channel to Channel Footprint

• Dual and Quad Packages Feature:

- Reduced Board Space

- Lower Pin and Parts Count

- Better Channel to Channel CTR Match

- Improved Common Mode Rejection

• Isolation Test Voltage from Double Molded Pack-

age, 5300 V

RMS

• Lead-free component

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

Agency Approvals

• UL1577, File No. E52744 System Code H or J,

Double Protection

• CSA 93751

• BSI IEC60950 IEC60965

• DIN EN 60747-5-2 (VDE0884)

DIN EN 60747-5-5 pending

Available with Option 1

Description

The ILD615/ ILQ615 are multi-channel phototransis-

tor optocouplers that use GaAs IRLED emitters and

high gain NPN phototransistors. These devices are

constructed using over/under leadframe optical cou-

pling and double molded insulation technology result-

ing a withstand test voltage of 7500 VAC

PEAK

and a

working voltage of 1700 V

RMS

The binned min./max. and linear CTR characteristics

make these devices well suited for DC or AC voltage

detection. Eliminating the phototransistor base con-

nection provides added electrical noise immunity from

the transients found in many industrial control envi-

ronments.

Because of guaranteed maximum non-saturated and

saturated switching characteristics, the ILD615/

ILQ615 can be used in medium speed data I/O and

control systems. The binned min./max. CTR specifi-

cation allow easy worst case interface calculations for

both level detection and switching applications. Inter-

facing with a CMOS logic is enhanced by the guaran-

teed CTR at I

= 1.0 mA.

Summary of content (11 pages)

PAGE 1
ILD615/ ILQ615 VISHAY Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) Features • Identical Channel to Channel Footprint • Dual and Quad Packages Feature: - Reduced Board Space - Lower Pin and Parts Count - Better Channel to Channel CTR Match - Improved Common Mode Rejection • Isolation Test Voltage from Double Molded Package, 5300 VRMS • Lead-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Dual Channel Quad Channel Agency Approvals • UL15
PAGE 2
ILD615/ ILQ615 VISHAY Vishay Semiconductors Order Information Part Remarks ILD615-1 CTR 40 - 80 %, Dual Channel, DIP-8 ILD615-2 CTR 63 - 125 %, Dual Channel, DIP-8 ILD615-3 CTR 100 - 200 %, Dual Channel, DIP-8 ILD615-4 CTR 160 - 320 %, Dual Channel, DIP-8 ILQ615-1 CTR 40 - 80 %, Quad Channel, DIP-16 ILQ615-2 CTR 63 - 125 %, Quad Channel, DIP-16 ILQ615-3 CTR 100 - 200 %, Quad Channel, DIP-16 ILQ615-4 CTR 160 - 320 %, Quad Channel, DIP-16 ILD615-1X007 CTR 40 - 80 %, Dual Channel, SMD-8 (o
PAGE 3
ILD615/ ILQ615 VISHAY Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.
PAGE 4
ILD615/ ILQ615 VISHAY Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Input Symbol Min Typ. Max Forward voltage Parameter IF = 10 mA Test condition VF 1.0 1.15 1.3 Breakdown voltage IR = 10 µA VBR 6.
PAGE 5
ILD615/ ILQ615 VISHAY Vishay Semiconductors Parameter Test condition Current Transfer Ratio (collector-emitter) Part Symbol Min Typ. Max Unit IF = 10 mA, VCE = 5.0 V ILD615-1 ILQ615-1 CTRCE 40 60 80 % IF = 1.0 mA, VCE = 5.0 V ILD615-2 ILQ615-2 CTRCE 13 30 IF = 10 mA, VCE = 5.0 V ILD615-3 ILQ615-3 CTRCE 63 80 IF = 1.0 mA, VCE = 5.0 V ILD615-4 ILQ615-4 CTRCE 22 45 IF = 10 mA, VCE = 5.0 V ILD615-1 ILQ615-1 CTRCE 100 150 IF = 1.0 mA, VCE = 5.
PAGE 6
ILD615/ ILQ615 VISHAY Vishay Semiconductors Typical Characteristics (Tamb = 25 °C unless otherwise specified) IF VCC = 5 V IF = 10 mA F = 10 KHz, DF = 50% VO tD tR VO RL = 75 Ω t PLH VTH = 1.5 V tF tS t PHL iild615_01 iild615_04 Figure 1. Non-saturated Switching Timing Figure 4.
PAGE 7
ILD615/ ILQ615 VISHAY Vishay Semiconductors 1000 VF - Forward Voltage - V 1. 3 ICE - Collector Current - mA 1.4 Ta = –55 °C 1.2 Ta = 25 °C 1.1 1.0 0.9 Ta = 85° C 0.8 10 25 °C 50 °C 75 °C 90 °C 1 .1 .1 0.7 .1 1 10 IF - Forward Current - mA 100 10 1 VCE - Collector-Emitter Voltage - V 100 iild615_10 iild615_07 Figure 10. Maximum Collector Current vs. Collector Voltage 10000 CTRNF - Normalized CTR Factor Figure 7. Forward Voltage vs.
PAGE 8
ILD615/ ILQ615 VISHAY 10 5 2.0 Normalized to: VCE = 10 V, IF = 5 mA, CTRce(sat) VCE = 0.4 V 1.5 ICEO - Collector-Emitter - nA CTRNF - Normalized CTR Factor Vishay Semiconductors NCTRce 1.0 NCTRce(sat) 0.5 TA = 70 °C 0.0 .1 1 10 IF - LED Current - mA 10 4 10 3 10 2 Vce = 10 V 10 1 Typical 10 0 10 -1 100 10 -2 -20 0 20 40 60 80 100 TA - Ambient Temperature - °C iild615_16 Figure 16. Collector Emitter Leakage vs. Temperature 1000 2.
PAGE 9
ILD615/ ILQ615 VISHAY Vishay Semiconductors Figure 19. -4, Propagation Delay vs. Collector Load Resistor 2.5 IF = 10 mA VCC = 5 V, Vth = 1.5 V 100 2.0 tpLH 10 1.5 tpHL 1 tpHL - Propagation High-Low µs tpLH - Propagation Low-High µs 1000 1.0 .1 1 10 100 RL - Collector Load Resistor - kΩ iild615_19 Package Dimensions in Inches (mm) pin one ID 4 3 2 1 5 6 7 8 .255 (6.48) .268 (6.81) ISO Method A .379 (9.63) .390 (9.91) .030 (0.76) .045 (1.14) 4° typ. .031 (0.79) .300 (7.62) typ. .
PAGE 10
ILD615/ ILQ615 VISHAY Vishay Semiconductors Package Dimensions in Inches (mm) pin one ID 8 7 6 5 4 3 2 1 .255 (6.48) .265 (6.81) 9 10 11 12 13 14 15 16 ISO Method A .779 (19.77 ) .790 (20.07) .030 (.76) .045 (1.14) .300 (7.62) typ. .031(.79) .130 (3.30) .150 (3.81) 4° .018 (.46) .022 (.56) .020(.51) .035 (.89) .100 (2.54)typ. .050 (1.27) 10° typ. 3°–9° .008 (.20) .012 (.30) .110 (2.79) .130 (3.30) .230 (5.84) .250 (6.35) i178007 Option 6 Option 7 .407 (10.36) .391 (9.96) .
PAGE 11
ILD615/ ILQ615 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.