Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysOptocoupler DIP 16 Type (misc.) AC/bidirectional

VISHAY

ILD620/ 620GB / ILQ620/ 620GB

Document Number 83653

Rev. 1.3, 26-Apr-04

Vishay Semiconductors

www.vishay.com

i179053

A/C

Dual Channel

Quad Channel

Optocoupler, Phototransistor Output, AC Input (Dual, Quad

Channel)

Features

• Identical Channel to Channel Footprint

• ILD620 Crosses to TLP620-2

• ILQ620 Crosses to TLP620-4

• High Collector-Emitter Voltage, BV

CEO

= 70 V

• Dual and Quad Packages Feature:

- Reduced Board Space

- Lower Pin and Parts Count

- Better Channel to Channel CTR Match

- Improved Common Mode Rejection

• Isolation Test Voltage 5300 V

RMS

Agency Approvals

• UL File #E52744 System Code H or J

• CSA 93751

• DIN EN 60747-5-2(VDE0884)

DIN EN 60747-5-5 pending

Available with Option 1

• BSI IEC60950 IEC60965

Description

The ILD620/ ILQ620 and ILD620GB/ ILQ620GB are

multi-channel input phototransistor optocouplers that

use inverse parallel GaAs IRLED emitter and high

gain NPN silicon phototransistors per channel. These

devices are constructed using over/under leadframe

optical coupling and double molded insulation result-

ing in a withstand test voltage of 5300 V

RMS

The LED parameters and the linear CTR characteris-

tics make these devices well suited for AC voltage

detection. the ILD/Q620GB with its low I

quaranteed

CTR

CEsat

minimizes power dissipation of the AC volt-

age detection network that is placed in series with the

LEDs. Eliminating the phototransistor base connec-

tion provides added electrical noise immunity from the

transients found in many industrial control environ-

ments.

Order Information

For additional information on the available options refer to

Option Information.

Part Remarks

ILD620 CTR > 50 %, DIP-8

ILD620GB CTR > 100 %, DIP-8

ILQ620 CTR > 50 %, DIP-16

ILQ620GB CTR > 100 %, DIP-16

ILD620-X007 CTR > 50 %, SMD-8 (option 7)

ILD620-X009 CTR > 50 %, SMD-8 (option 9)

ILD620GB-X009 CTR > 100 %, SMD-8 (option 9)

ILQ620-X009 CTR > 50 %, SMD-16 (option 9)

ILQ620GB-X009 CTR > 100 %, SMD-16 (option 9)

Summary of content (9 pages)

PAGE 1
VISHAY ILD620/ 620GB / ILQ620/ 620GB Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input (Dual, Quad Channel) Features • • • • • Identical Channel to Channel Footprint ILD620 Crosses to TLP620-2 ILQ620 Crosses to TLP620-4 High Collector-Emitter Voltage, BVCEO = 70 V Dual and Quad Packages Feature: - Reduced Board Space - Lower Pin and Parts Count - Better Channel to Channel CTR Match - Improved Common Mode Rejection • Isolation Test Voltage 5300 VRMS Agency Approvals Dual Channel Quad
PAGE 2
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.
PAGE 3
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Input Symbol Min Typ. Max Forward voltage Parameter IF = ± 10 mA Test condition VF 1.0 1.15 1.3 V Forward current VR = ± 0.7 V IF 2.
PAGE 4
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors Switching Characteristics Non-saturated Parameter Test condition Symbol Min Typ. Max Unit On time IF = ± 10 mA, VCC = 5.0 V, RL = 75 Ω, 50 % of VPP ton 3.0 µs Rise time IF = ± 10 mA, VCC = 5.0 V, RL = 75 Ω, 50 % of VPP tr 20 µs Off time IF = ± 10 mA, VCC = 5.0 V, RL = 75 Ω, 50 % of VPP toff 2.3 µs Fall time IF = ± 10 mA, VCC = 5.0 V, RL = 75 Ω, 50 % of VPP tf 2.0 µs Propagation H-L IF = ± 10 mA, VCC = 5.
PAGE 5
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors 10 5 ICEO - Collector-Emitter - nA IF tPLH tPLH VO tS 50% tD 10 2 Vce = 10 V 10 1 Typical 10 0 10 -1 0 20 40 60 80 100 TA - Ambient Temperature - °C toff ton iild620_03 10 3 10 -2 -20 tF tR 10 4 iild620_06 Fig. 6 Collector-Emitter Leakage vs. Temperature Fig. 3 Non-saturated Switching Timing tD tR VO t PLH VTH = 1.
PAGE 6
ILD620/ 620GB / ILQ620/ 620GB VISHAY 100 50 Normalized to IF = 10 mA VCE = 5 V 10 5.0 2.5 CTRNF - Normalized CTR Factor IC- Normalized Collector Current Vishay Semiconductors ILD/Q620GB ILD/Q620 1.0 0.5 0.1 1 5 10 2.0 Normalized to: VCE = 10 V, IF = 5 mA, CTRce(sat) VCE = 0.4 V 1.5 1.0 NCTRce 0.5 NCTRce(sat) TA = 100 °C 0.0 .1 20 1 10 IF - LED Current - mA Forward Current - IF mA iild620_09 iild620_12 Fig. 9 Collector Current vs. Diode Forward Current Fig.
PAGE 7
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors ICE - Collector Current - mA 1000 Rth = 500 °C/W 100 10 25 °C 50 °C 75 °C 90 °C 1 .1 .1 10 1 VCE - Collector-Emitter Voltage - V 100 iild620_15 Fig. 15 Maximum Collector Current vs. Collector Voltage Package Dimensions in Inches (mm) pin one ID 4 3 2 1 5 6 7 8 .255 (6.48) .268 (6.81) ISO Method A .379 (9.63) .390 (9.91) .030 (0.76) .045 (1.14) 4° typ. .031 (0.79) .300 (7.62) typ. .130 (3.30) .150 (3.81) .050 (1.27) .018 (.
PAGE 8
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors Package Dimensions in Inches (mm) pin one ID 8 7 6 5 4 3 2 1 .255 (6.48) .265 (6.81) 9 10 11 12 13 14 15 16 ISO Method A .779 (19.77 ) .790 (20.07) .030 (.76) .045 (1.14) .300 (7.62) typ. .031(.79) .130 (3.30) .150 (3.81) 4° .020(.51) .035 (.89) .018 (.46) .022 (.56) .100 (2.54)typ. .050 (1.27) 10° typ. 3°–9° .008 (.20) .012 (.30) .110 (2.79) .130 (3.30) .230 (5.84) .250 (6.35) i178007 Option 7 Option 9 .375 (9.53) .
PAGE 9
ILD620/ 620GB / ILQ620/ 620GB VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.