Datasheet

ManualsBrandsVishay ManualsCapacitors196 HVC ENYCAP Hybrid Energy Storage Capacitor, 4F, 4.2V

196 HVC ENYCAP™

www.vishay.com

Vishay BCcomponents

Revision: 23-Jul-2018

Document Number: 28409

For technical questions, contact: hybridstorage@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Hybrid Energy Storage Capacitors

Image is not to scale

FEATURES

• Polarized energy storage capacitor with high

capacity and energy density

• Voltage flexibility: 1.4 V (single cell) to 2.8 V /

4.2 V / 5.6 V / 7.0 V / 8.4 V (multiple cells)

• Available in stacked through-hole (STH, radial),

surface-mount flat (SMF) and lay flat configurations (LFC)

with wire and connectors

• Useful life: up to 2000 h at 85 °C

• No cell balancing necessary

• Soft and low transient-voltage-controlled charging

characteristic

• Non-hazardous electrolyte

• Maintenance-free, no service necessary

• Evaluation kits for engineering are available under

ordering code: MAL219699001E3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Power backup for memory controller, flash backup, RAID

systems, SRAM, DRAM

• Power failure and write cache protection for enterprise

SSD and HDD

• Real time clock power source

• Burst power support for flash lights, wireless transmitters

• Backup power for industrial PC’s and industrial controls

• Storage device for energy harvesting

• Emergency light and micro UPS power source

MARKING

The capacitors are marked with the following information:

• Rated capacitance (in F)

• Rated voltage (in V)

• Date code

• Negative / positive terminal identification

PACKAGING

Supplied in ESD trays only

Summary of content (15 pages)

PAGE 1
96 HVC ENYCAP™ www.vishay.com Vishay BCcomponents Hybrid Energy Storage Capacitors FEATURES • Polarized energy storage capacitor with high capacity and energy density • Voltage flexibility: 1.4 V (single cell) to 2.8 V / 4.2 V / 5.6 V / 7.0 V / 8.
PAGE 2
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents QUICK REFERENCE DATA VALUE DESCRIPTION SINGLE CELL 2 CELLS 3 CELLS 4 CELLS 5 CELLS 6 CELLS Nominal case size (Ø D x L in mm) Stacked Through-Hole (STH) 7 x 2.5 12 x 2.5 25 x 15 x 2.5 35 x 25 x 5 7x5 12 x 5 25 x 15 x 5 35 x 25 x 7.5 7 x 7.5 12 x 7.5 25 x 15 x 7.5 35 x 25 x 10 7 x 10 12 x 10 25 x 15 x 10 35 x 25 x 15 7 x 12.5 12 x 12.5 35 x 25 x 17.
PAGE 3
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS STACKED THROUGH HOLE CONFIGURATION (STH): Examples VERTICAL MOUNT Ø Dmax. - - Lmax. + Ø 0.8 + 0.5 6 +- 0.5 (2 x) - Ø 0.64 F Fig. 1 - Form A2: Stacked Through Hole (example 4 cells, 2 pins) (1) STACKED THROUGH HOLE CONFIGURATION (STH): Examples HORIZONTAL MOUNT Ø Dmax. Lmax. + 3.5 +- 0.5 0.5 (2 x) F Ø 0.64 Fig. 2 - Form B2: Stacked Through Hole (example 5 cells, 2 pins) (1) Ø Dmax. Lmax. + 0.
PAGE 4
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents _ 0.1 (2 x) R1.5 (inner radius) 0.75 (2 x) 0 2.8 max. (including tags thickness) 0.5 1.35 + 3 +0.5 -0.5 Ø 7.5 max. 8.9 +0.5 -0.5 (2 x) Fig. 5 - Form D1: Surface Mount Flat (single cell, keyed polarity) 0.1 (2 x) - 2.8 max. 0.5 3 +- 0.5 Ø 12.5 max. + 0.2 3.5 +- 0.2 1.0 (2 x) Ø Dmax. Fig. 6 - Form D2: Surface Mount Flat (single cell, keyed polarity) 0.5 (2 x) 1 (2 x) + 0.1 (2 x) - 3.8 max. 3 (2 x) Ø Dmax. 0.5 4 +- 0.5 (2 x) Fig.
PAGE 5
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents LAY FLAT CONFIGURATION (LFC) WITH CONNECTOR: Example 5 cells in series Red (AWG 28, UL 1061) + Pin 1: red Ø Dmax. Black (AWG 28, UL 1061) - Pin 2: black Molex connector; Housing: 51146-0200 Terminal: 50641-8041 3.5 max. 50 +- 55 Lmax. Fig. 10 - Form F: Lay Flat (example for 5 cells) 27 max. Lmax. 15.5 max. + 0.5 (2 x) 1 +- 0.5 - + 4 (3 x) 0.25 (2 x) F F1 Fig. 11 - Form I: Stacked Through Hole Oval (PCBD) 4 +- 0.5 0.5 (2 x) 27 max.
PAGE 6
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents 35 max. 0.5 4 +- 0.5 (2 x) 0.5 Lmax. + 0.5 5 +- 0.5 - 0.2 (2 x) 1 (3 x) F1 F Fig. 14 - Form H: Stacked Through Hole Oval Horizontal Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE D x L x H (mm) 7.0 x 7.0 x 2.5 7.0 x 7.0 x 2.5 7.0 x 7.0 x 2.5 7.0 x 7.0 x 5.0 7.0 x 7.0 x 7.5 7.0 x 7.0 x 10.0 7.0 x 7.0 x 12.5 7.0 x 7.0 x 15.0 12.0 x 12.0 x 2.5 12.0 x 12.0 x 2.5 12.0 x 12.0 x 2.5 12.0 x 12.0 x 5.0 12.0 x 12.0 x 7.
PAGE 7
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR UCT IL RI DESCRIPTION Rated capacitance, tolerance -20 % / +80 %,  measured by constant current discharge method Upper category temperature Max. leakage current after 24 h at UR Max. internal resistance at 1 kHz Hybrid Storage Capacitor 15 F / 1.4 V Nominal case size: Ø 12.0 mm x 2.
PAGE 8
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) NOMINAL CASE SIZE ØDxL DxLxH (mm) CR (F) CASE CODE FOR M ESR MIN. IL ESR AC (1) F F1 UCT STORAGE PACKAGING (2) 24 h DC ORDERING CODE (mm) (mm) (°C) 1 kHz ENERGY QUANTITIES (mA) () () (Ws) SURFACE MOUNT FLAT CONFIGURATION (SMF) 1.4 4 7.0 x 7.0 x 2.5 2 pin C 1.4 15 12.0 x 12.0 x 2.5 2 pin C 1.4 4 7.0 x 7.0 x 2.5 2 pin D1 1.4 15 12.0 x 12.0 x 2.5 2 pin D2 2.8 4 7.0 x 14.0 x 2.5 2 pin E2 2.8 15 12.
PAGE 9
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents MEASURING OF CHARACTERISTICS CAPACITANCE (C) CAPACITANCE Capacitance shall be measured by constant current discharge method. DISCHARGE CURRENT AS A FUNCTION OF RATED CAPACITANCE PARAMETER Rated capacitance, CR Discharge current, ID VALUE 15 45 15 45 4 4 UR UNIT F mA 90 90 ΔU3 C (F) 45 45 45 45 90 90 90 90 90 90 ID (A) 0.045 0.045 0.045 0.045 0.090 0.090 0.090 0.090 0.090 0.090 UR (V) 1.4 2.8 4.2 5.6 1.4 2.8 4.2 5.6 7.0 8.4 U1 (V) 1.3 2.7 4.
PAGE 10
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents 100 000 IL (μA) Curve 1: 90 F (1.4 V to 8.4 V) Curve 2: 45 F (2.8 V to 5.6 V) Curve 3: 15 F (1.4 V to 8.4 V) Curve 4: 4 F (1.4 V to 8.4 V) 10 000 1000 1 2 100 3 10 1 4 0 10 20 30 40 50 60 70 80 Time (h) Fig. 19 - Typical Leakage Current at 20 °C as a Function of Time Table 5 VOLTAGE TO BE USED FOR SERIES CONNECTION N CELLS IN SERIES UR (V) U1 (V) U2 (V) 1 1.4 1.3 0.7 2 2.8 2.7 1.9 3 4.2 4.0 3.1 4 5.6 5.4 4.4 5 7.
PAGE 11
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents 106 Backup time (s) 5 10 106 Backup time (s) 5 10 104 104 103 103 102 102 10 10 C = 90 F (1.4 V to 8.4 V) C = 45 F (2.8 V to 5.6 V) 1 0.1 1 10 1 1 100 1000 Discharge current (mA) Fig. 22 - Typical Backup Time as a Function of Discharge Current 10 100 1000 10 000 Discharge current (mA) Fig. 23 - Typical Backup Time as a Function of Discharge Current CHARGE CHARACTERISTICS Charge cc 4 mA/5.6 V and discharge 4 mA/3.
PAGE 12
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents Charge cc 30 mA / 5.6 V and discharge 200 mA / 3.2 V Charge cccv 30 mA / 5.6 V + 30 min and discharge 200 mA / 3.2 V 6 200 200 150 Voltage 150 Voltage 5 Voltage (V) 0 3 -50 -100 2 100 50 4 Voltage (V) 50 Current (mA) 100 4 0 Current 3 -50 -100 2 -150 1 -150 1 Current -200 0 0 2 4 6 8 10 12 14 16 18 -200 -250 25 0 0 10 20 t (min) 30 40 -250 60 t (min) Fig.
PAGE 13
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents PRODUCT AND MOUNTING CHARACTERISTICS Attention: parts are pre-charged at delivery - handle appropriate. At delivery products are pre-charged and voltage over terminals is near nominal voltage. Short circuiting of product terminals is permitted. Do not short circuit permanently. Short circuiting of charged cells may heat up the cells.
PAGE 14
196 HVC ENYCAP™ www.vishay.com Vishay BCcomponents SOLDERING As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the maximum specified soldering time and case temperature should never be exceeded. EVALUATION KIT Evaluation kits are available under ordering code: MAL219699001E3. The engineering kit includes a charge and discharge demo board with different 196 HVC capacitor samples.
PAGE 15
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.