Datasheet

P13SM
www.vishay.com
Vishay Sfernice
Revision: 04-Jul-17
4
Document Number: 51064
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability
OPTIONS
Special feature command shaft
Length is measured from the mounting surface to the free end of the shaft. The
screwdriver slot is aligned with the wiper within ± 10°. Special shafts are available, in
accordance to drawings supplied by customers. We recommend that customers
should not machine tool shafts, in order to avoid damage. Bending or torsion of
terminals should also be avoided.
MARKING
Printed:
• Vishay trademark
• Part number (including ohmic value code, tolerance code and resistance law)
• Manufacturing date
•Marking of terminals a
PACKAGING
In box
Packaging quantity depending on shafts:
• Box of 5 pieces for shaft FR (code BO5)
• Box of 10 pieces for shaft FG or FL (code BO10)
• Box of 15 pieces for shaft BJ (code BO15)
• Box of 25 pieces for shaft BB (code BO25)
PERFORMANCE
TESTS CONDITIONS
TYPICAL VALUES AND DRIFTS
ΔR
T
/R
T
(%) ΔR
1-2
/R
1-2
(%) OTHER
Electrical endurance
1000 h at rated power
90'/30' - ambient temperature 70 °C
± 1 % - Contact res. variation: < 3 % Rn
Climatic sequence
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold -55 °C
Phase D damp heat 5 cycles
± 0.5 % ± 1 % -
Damp heat, steady state
56 days
40 °C, 93 % HR
± 0.5 % ± 1 %
Dielectric strength: 1000 V
Insulation resistance: > 10
4
MΩ
Change of temperature
5 cycles
-55 °C at +125 °C
± 0.5 % - -
Mechanical endurance 25 000 cycles ± 3 % - Contact res. variation: < 2 % Rn
Shock
50 g’s at 11 ms
3 successive shocks
in 3 directions
± 0.1 % ± 0.2 % -
Vibration
10 Hz to 55 Hz
0.75 mm or 10 g’s
during 6 h
± 0.1 % - ΔV
1-2
/V
1-3
< ± 0.2 %